Specifications

10
Installation Instructions
DRAIN LINE INSTDRAIN LINE INST
DRAIN LINE INSTDRAIN LINE INST
DRAIN LINE INST
ALLAALLA
ALLAALLA
ALLA
TIONTION
TIONTION
TION
• Connect drain line to air gap, waste tee or disposer using
either previously determined method.
Waste Tee Installation Disposer Installation
Method 2 – High drain loop with waste tee or dis-Method 2 – High drain loop with waste tee or dis-
Method 2 – High drain loop with waste tee or dis-Method 2 – High drain loop with waste tee or dis-
Method 2 – High drain loop with waste tee or dis-
poserposer
poserposer
poser
IMPORIMPOR
IMPORIMPOR
IMPOR
TT
TT
T
ANTANT
ANTANT
ANT –
When connecting drain line to disposer,
check to be sure that drain plug has been
removed. DISHWASHER WILL NOT DRAIN
IF PLUG IS LEFT IN PLACE.
TIPTIP
TIPTIP
TIP
::
::
: Avoid unnecessary service call charges. Always be sure
disposer drain plug has been removed before attaching
dishwasher drain hose to the disposer.
Cutting Lines
1"
3/4"
5/8"
IMPORTANT: Do not cut corrugated
portion of hose
Fasten to underside
of countertop
32"
Min.
18"
Min.
Fasten to underside
of countertop
18"
Min.
Hose Clamp
Coupler
Hose Clamp
Remove
Disposer
Plug
STEP 12STEP 12
STEP 12STEP 12
STEP 12
CONNECT DRAIN LINECONNECT DRAIN LINE
CONNECT DRAIN LINECONNECT DRAIN LINE
CONNECT DRAIN LINE
FOLLOW ALL LOCAL CODES AND ORDINANCES.FOLLOW ALL LOCAL CODES AND ORDINANCES.
FOLLOW ALL LOCAL CODES AND ORDINANCES.FOLLOW ALL LOCAL CODES AND ORDINANCES.
FOLLOW ALL LOCAL CODES AND ORDINANCES.
The drain hose molded end will fit 5/8”, 3/4” or 1” diameter
connections on the air gap, waste tee or disposer. Cut on the
marked line as required for your installation.
• If a longer drain hose is required, add up to 42” of length
Figure U
Figure V
for a total of 10 ft. to the factory installed hose. Use 5/8” or
7/8” inside diameter hose and a coupler to connect the
two hose ends. Secure the connection with hose clamps.
• Secure the drain hose to the air gap, waste tee or disposer
with clamps.
NONO
NONO
NO
TE:TE:
TE:TE:
TE: TOTAL DRAIN HOSE LENGTH MUST NOT EXCEED
10 FEET FOR PROPER DRAIN OPERATION.
Method 1 – Air gap with waste tee or disposerMethod 1 – Air gap with waste tee or disposer
Method 1 – Air gap with waste tee or disposerMethod 1 – Air gap with waste tee or disposer
Method 1 – Air gap with waste tee or disposer
Figure W
Waste Tee Installation Disposer Installation
Figure X