Owner's Manual (Espanol)

REFRIGERATOR INSTALLATION
NOTE: Removing the doors is the recommended procedure when it is necessary to move the refrigerator through
a
narrow opening. If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE DOOR HANDLES
NOTE: Handle appearance may vary from
the illustrations on this page.
1. Removing Refrigerator Handle
• Loosen the set screws with a 3/32"
(2.5mm) Allen wrench and remove the
handle.
NOTE: If the handle mounting fasteners
need
to be tightened or removed, use a
1/4" (6.4mm) Allen wrench.
2. Removing Freezer Drawer Handle
• Loosen the set screws located on
the
lower side of the handle with a 1/8"
(3.1 mm) Allen wrench and remove
the
handle.
NOTE: If
the handle mounting fasteners
need
to be tightened or removed, use
a
1/4" (6.4mm) Allen wrench.
Mounting ----J""'---~
Fasteners
Wrench
11