Owner's Manual (Espanol)

CARE AND CLEANING
A WARNING
Explosion Hazard
Use non-flammable cleaner. Failure to do so can
result in death, explosion, or fire.
Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about
once a month
to prevent odors. Wipe up spills
immediately.
GENERAL CLEANING TIPS
• Unplug refrigerator or disconnect power.
• Remove all removable parts, such as shelves,
crispers, etc. Refer to sections in Using Your
Refrigerator for
removal instructions.
• Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use abrasive or
harsh
cleaners.
•
Hand wash, rinse and dry all surfaces thoroughly.
• Plug
in refrigerator or reconnect power.
OUTSIDE
Waxing external painted metal surfaces helps
provide rust protection. Do not wax plastic parts.
Wax painted
metal surfaces at least twice a year
using
appliance wax (or auto paste wax). Apply wax
with a
clean, soft cloth.
For products with a stainless steel exterior, use a
clean sponge or soft cloth and a mild detergent in
warm water. Do not use abrasive
or harsh cleaners.
Dry thoroughly with a soft cloth.
Do not use appliance wax, bleach, or other
products containing
chlorine on stainless steel.
32
INSIDE WALLS (allow freezer to warm up so
the cloth will not stick}
To help remove odors, you can wash the inside of
the refrigerator with a mixture of baking soda and
warm water. Mix 2
tablespoons baking soda to 1
quart
of water (26 g soda to 1 liter water.) Be sure
the baking soda is
completely dissolved so it does
not scratch the surfaces
of the refrigerator.
ACAUTION: While cleaning the inside, do not spray
water.
DOOR LINERS AND GASKETS
Do not use cleaning waxes, concentrated
detergents,
bleaches, or cleaners containing
petroleum on plastic refrigerator parts.
PLASTIC PARTS (covers and panels}
Do not use window sprays, abrasive cleansers, or
flammable fluids. These can scratch or damage the
material.
CONDENSER COILS
Use a vacuum cleaner with
an attachment to
clean the
condenser cover and vents.
LIGHT BULB REPLACEMENT
A WARNING
Electrical Shock Hazard
Before replacing a Light Bulb, either unplug the
refrigerator
or turn off power at the circuit breaker
or fuse box.
NOTE: Refrigerator light is LED interior lighting and
service
should only be perfomed by a
qualified technician.