Owner's Manual

464323113 · 25

Remove the two factory-attached screws and washers from the side burner valve bracket (A).

Use the same screws and washers to attach the side burner bezel and valve bracket to the side

shelf fascia (A). Press side burner control knob onto valve stem (A).

Place side burner into shelf (B). Fit burner tube over valve (C). Fit stud on burner bottom into

small hole in burner drip pan (B). Under drip pan, secure stud with wing nut (C).

Make sure valve is secure within burner tube. Hook venturi clip to hole in burner tube and

around manifold (C).

Side burner Bezel

Screws and washers

removed from valve

bracket

Valve bracket

Venturi Clip

Side burner heat shield

Burner tube

Wing Nut

Qty. 1

Wing nut

Side burner

Stud

Valve stem

Valve

Valve stem

come through

this hole

Side burner

drip pan

Side burner

control knob