Use & Care Guide Manual English de Uso y Cuidado / Espa_ol Models/Modelos: 790.4427 _, 790.4437 _ Elite Ke ® IIIIIIIIIIIIIIIIIIIIIIIIIII m @ P_rr°ll_ d_ "_'_ :=: Color numbe_3 nOmero de color P/N 318203644B (1007) Sears Brands Management Corporation Hoffman Estates, IL 60179 www.kenmore.com U.S.A. www.sears.
Table of Contents Sabbath Feature Mode ................................................. Warm & Hold Feature ................................................... Warranty ............................................................................. 2 IMPORTANT SAFETY INSTRUCTIONS ....................... 3-4 Serial Hate Location .......................................................... 4 Product Record .................................................................... 4 Locking the Controts .............
iMPORTANT SAFETY iNSTRUCTiONS Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. This symbol Will help alert youto or property damage, This symbol will help alert situations that may bags after unpacking the appliance. Never allow children to play with packaging material.
iMPORTANT SAFETY iNSTRUCTiONS Use Proper Pan Size. This appliance is equipped with one or more surface units of different sizes. Select utensils having fiat bottoms large enough to cover the surface unit. The use of undersized utensils will expose a portion of the surface heating unit to direct contact and may result in ignition of clothing. Proper relationship of utensil to the surface unit will also improve efflciency.
Cooktop Features READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE COOKTOP The Cooking surface may be HOT form Zones may appear be residual heat transferred 1. Left Rear Double la. 2. 3. 4. 5. Left Rear Single Radiant Element Left Front Single Radiant Element Right Rear Single Radiant Element Right Front Triple radiant Element Center Rear Single Radiant Element (Fig. 2 only) Right Rear Single Element Control Pads Left Rear Double Element Control Pads 6. 7.
INCORRECT CORRECT Surface Cooking Use Proper Cookware Cookware should have flat bottoms that make t good contact with the entire surface heating element. Check for * Fiat bottom • Curved and straight " Tight fitting lids. " Weight of handle flatness by rotating a ruler across the bottom and warped pan bottoms. sides. does not flit pan. Pan is well balanced. ° Pan sizes match the amount of the cookware (See Fig. 1). Be sure to follow the recommendations using cookware to the right.
Setting Surface Controls General Abouf Cooktop Information fhe Ceramic Glass Cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop. Heat is transferred up through the surface of the cooktop to the cookware. Only fiat-bottom cookware should be used.
Setting Surface Controls (cont'd) Using the Touch Control Be sure that your finger is placed in the center of the touch pad. If the finger is not placed on the center of a pad, the cooldop Lightly contact may not respond to the selection the pad with the fiat part of your entire fingertip. made. Do not just use the narrow end of your fingertip. LED Messages CONTROLS are active.
Setting Surface Controls (cant'd) The Electronic Surface The Electronic the radiant Surface surface elements the touch pads is designed The available Element Control (ESEC) Element Control on the cooktop. to replace ESEC Window The ESEC control wiii display Display a digital control display in combination of with knobs. Surface Setting Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig.7 Fig.8 from Hi (Fig. 1) to Lo (Fig. 6) and or increase 3.0 (Figures 3 & 4) and 1.2 (Fig.
Setting Surface Controls (cont'd) Operating Single Radiant The 30" cooktop cooktop has 3 SINGLE To Operate 1. Place Surface has 2 SINGLE radiant radiant surface sized cookware elements: elements: the Single Radiant correctly Elements surface the RIGHT the RIGHT and REAR and LEFT REAR the and LEFT FRONT the positions LEFT FRONT positions (Fig. (Fig. 1); The 36" 2). Surface Elements: on the radiant surface element. 2. Touch andhold the!iI k! eypodunt,abeep sounds.
Setting Surface Controls (con£d) Operating the DOUBLE Surface r:lements The cooktops are equipped with a DOUBLE radiant surface element located at the left rear cooktop position (Fig. 1) or center rear cooktop position (Fig. 2). Indicator lights on the control panel at that position are used to indicate what portions of the dual radiant element wiii heat. The © light indicates that only the inner element wiii heat. The o & @ 9i! Fig.
Setting Surface Controls (cant'd) Operating the Triple Surface Element The cooktop surface position control is equipped element with a Triple radiant located at the right front cooktop (Figures 1 & 2). Indicator panel at that position what portions lights on the are used to indicate of the Triple radiant element will heat. The 0 light indicates that only the inner element Fig. 1 will heat. The © light indicates that both inner and double elements will heat together.
Setting Surface Controls (cant'd) Sabbath Feature Mode When the Sabbath feature is ON, all electronic surface element elements can be used even if the Sabbath Feature is on. To activate the Sabbath control displays show "Sb". The surface Feature Mode: TIMER In order to enter Sabbath at least one radiant burner has to be active. The user has to activate the A Con_rol (timer up slew) pad and the To turn ON an additional Lo0k(loci<) pad at the same tlme for a few seconds.
Setting Surface Controls (cant'd) Minute Timer The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track of time from 1 to 99 minutes. The Minute Timer Display located to the left of the Timer UP/DOWN arrow key pads will begin to count down minutes once set. To Set the Minute Timer: 1. 2. Touch the A located above TIMER.
General Care & Cleaning Cleaning Recommendations Before DO chemically NOT damage the For light to moderate Apply cleaning the For heavy, cooktop, use a cooktop ceramic be sure the controls cleaner glass are turned on a hot cooktop. to The fumes OFF can and is COOL. to your health, the cooktop be hazardous and can surface. Cleaning Creme directly pad to clean the entire cooktop burned Glass Cooktop soil: a few drops of CookTopO type no-scratch for the Ceramic surface.
BeFore You CaJJ OCCURRENCE POSSIBLE CAUSE/SOLUTION Entire cooktop does not operate. House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace fuse. If the problem is a circuit overload0 have this situation corrected by a qualified electrician. Wiring cover). connection Power outage. service. Error code is shown Mechanical control Surface element does not heat. interference with cooktop cover). No power to the appliance. this Before Incorrect hot enough.
PROTECTION Acuerdos Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmordeproduct is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection and aggravation. Agreement can save you money The Master Protection Agreement also helps extend the life of your new product.
Your Home For troubleshooting, product manuals and expert advice: www.managemylife.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.
