Owner's Manual
DUST BAG REPLACEMENT 1
NIIN
_IWARNING
Always unplug power cord from
electrical outlet before performing
maintenance to the vacuum cleaner.
TC) REMOVE DUST BAG
Pull on the dust bag cover latch located
on the side of the bag cover.
Grasp the dust bag collar and pull
gently, carefully removing the dust bag
from dust bag
holder.
Throw away
the used dust
bag.
Do not reuse
dust bag.
Beg
Holder
_ heck the
bag dust
chamber
and the
motor safety
filter for dirt
or clogs.
i iii II
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet
freshenerr face powder, fine dust,
plaster, soot, etc. can clog the bag
and cause it to burst before it is full.
Change bag more often when
vacuuming these materials.
Note: Always check motor safety filter
for clogs. See MOTOR SAFETY FILTER
CLEANING section Page 17.
TO REPLACEDUST BAG
Fold the tab
on the new Dust
dust bag Beg
away from the
opening that
fits on the bag
holder.
Note: See
PARTS AND
FEATURES for Bag number Page 5.
Insert the dust bag onto
the dust bag holder
completely by holding
the bag collar.
Place the dust bag collar into position.
Tuck the 4 corners
of the bag into bag
chamber as shown
here. Be sure the
bottom and sides
of the dust bag are
completely within
bag cavity prior to
closing the bag
cover.
Close the dust bag
cover.
You will hear a
distinct snap when
cover is securely
closed.
Check to see that the dust bag is fully
placed inside the bag chamber.
16