Owner's Manual

I
LIGHT BULB REPLACEMENT
_, WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shack or personal injury from
the vacuum cleaner suddenly starting,
TO REMOVE LIGHT BULB
See PARTS AND FEATURES for bulb
number Page 5,
1. Disconnect
power cord
from electrical
outlet.
2, Press handle
release pedal
and lay vacuum
cieaner back.
3, Pry light lens
out at slots
He,_dtight using flat
Lens screwdriver as
shown on both
sides. Rotate
lens up and lift
off,
IAcAuTlo"
Do not usea butb rated over 9W (13V).
During extendeduse, heat from the bulb
coutdoverheat surroundingplastic parts,
4, Remove the light
bulb by pulling straight
out.
_CAUTION
5, To replace the
light bulb carefully
/ insert fully into slot,
Do not plug in or turn on unli] the vacuum
cleaner is completely reassembled.
II I IIIIIIIIIIII
6. To replace light lens,
place tab at front of lens
into slot. Rotate lens
down and firmly snap
into place.
2I