Installation Guide

Installing Your Water Optimizer
Installing Your Water Optimizer 2-44
4. Next, remove the Input Port Plug from Source Input Port using the standard quick
connect detach method, as shown below (but with appliance port and plug, rather than
shuto valve and tubing).
Diagram 2.7.4 - How To Detach Quick Connect Tubing
5. Connect the open end of the section of
A
1/4 in. White PP Tubing connected to
your water source to the Source Input Port on the back of your Optimizer, as shown.
Diagram 2.7.5 - Connect Source Line To Source Input Port On Your Water Optimizer