Installation Guide

Installing Your Water Optimizer
Installing Your Water Optimizer 2-46
Installing Filters
Please note, only the INTERNAL lter (ULTRA+3 ) is required for the appliance to
function. However, this special edition comes with an additional EXTERNAL lter
(Particle) that will, in many cases, extend your primary lters life. We recommend
installing it from the beginning, but can be connected later, as necessary.
Use of the external lter could result in a reduced ow rate, based on your water
pressure, and the distance between your Water Optimizer and water source.
1. Remove the magnetic lter door from the internal lter compartment.
Diagram 2.8.1 - Remove Magnetic Filter Door To Reveal EZ-twist Mount In Water Optimizer
2. Grab the ULTRA+3 Hybrid Filter you ushed earlier (to install in the internal slot).
Remove the bags and top cap.