Owners manual

34611-40100219 • 21
Grill Head to Cart
□ This step requires two people to lift and position grill head onto cart.
□ If not already done, remove the tie wraps and packing material from regulator hose, side burner
valve and igniter wire. Pull hose and igniter wire out to side of grill head.
□ Carefully lower the grill head onto the cart. Make sure the regulator hose and
igniter wire are hanging outside the cart. Open lid and attach head to cart with(4) M6x13 screws
and M6 compression washers.
□ Note: Do not tighten these screws until the back rail is attached to cart in Step 9.
M6X13 screw Qty: 4 pcs M6 compression washer Qty: 4 pcs