Installation Instructions

ENGLISH
Tip:
• Hold rods close to the middle when tightening.
**Turn rod in your right
hand towards you
B
Adjust curtains to desired position.
Trouble Shooting
Rod is too large or small for window casing
• Turn rod away from you to loosen
• Follow steps 1-2
Shirring curtain onto rod:
• Remove finial from the larger
outer rod with a twist & pull motion.
• Shirr curtain onto rod.
• Re-attach finial.
1 2
Sizing rod to your window:
• With finials mounted on rod, place inside window casing
and extend out until the finial pads contact each side
of the inside window casing.
• Grip both the inner and outer rod, then turn the rod in your
right hand towards you to tighten. When tightening, rod
will expand slightly.
B
A
A
For Wider Installations
Remove finial from outer rod. • Insert finial into end of extension tube.
• Insert extension tube into outer rod.
• Follow Steps 1-2.
Kenney Manufacturing Company
1000 Jeerson Blvd.
Warwick, RI 02886 USA
www.kenney.com
1-800-753-6639
79-RDTR1-ECOM
Installation Instructions