PULL CHAIN SWITCH BOWER, CORD 11/2012 ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS UNPACK THE |LAMP YOU SHOULD HAVE RECEDED PACKAGE: LAMP BODY. ASSEMBLE THE LAMP 1. INSTALL A 60 WATT MAXIMUM MEDIUM BASE TYPE A" BULB {NOT INCLUDED) INTO SOCKET. 2, PLUG THE POWER WORD INT AN OUCH THE LAMP BY PULLING PULL CHAIN SWEET BULB REPLACEMENT 1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE AND BULB ARE COOL AND LAM S UNPLUGGED. THE FOLLOWING PARTS IN THE ET AND TURN ON 2.
