You should have received the following parts in the package. Please ensure that all parts are accounted for.
BUBBLE OUTDOOR SOLAR FLOOR FOUNTAIN Care and Instruction Manual FPO
51014MS ASSEMBLY INSTRUCTIONS Thank you for purchasing a Kenroy Home water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns. CUSTOMER SUPPORT TEAM For any additional questions or concerns please contact our Customer Support Team: 904-642-4340 @KenroyHome customerorders@kenroyhome.
1014MS ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. When assembling ensure that all parts are firmly tightened. Make sure solar panel is not in shadow and receiving direct sunlight.
51014MS ASSEMBLY INSTRUCTIONS Feed longer pump power cord (C) through plastic tube. Cord should exit through notch in fountain body (A). Plastic tube C A Attach the pump (C) to the rubber hose. Join the light connectors together.
51014MS ASSEMBLY INSTRUCTIONS Place the column assembly (B) into fountain body (A). B A Join the tube (F) and stake (G) together and insert tube assembly (F) into hole in back of solar panel (D). Insert the stake into the ground where the panel can receive direct sunlight.
51014MS ASSEMBLY INSTRUCTIONS FINAL STEPS Fill fountain body with 1.6 gallons of distilled water. Optional Accessory: (Model# AC Charger), connect the connector from AC charger (H) with the green battery connector from solar panel (D) and screw the cap tightly, plug AC charger (H) into outlet to charge the battery. Connect the connector from pump (C) with the connector from solar panel (D) and screw the cap tightly. Turn pump and light on at switch on panel. Use shims (E) to level fountain as necessary.
51014MS ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To keep water clean • Periodically change water to prevent algae buildup. Rotor/Impeller Pump housing Impeller cover Filter/ Front cover If the pump fails to run: • Make sure the solar panel is receiving direct sunlight. Performance is directly related to the amount and strength of sunlight received. • See solar panel troubleshooting. You may need to boost charge or replace the battery. • Check tubing for kinks and obstructions.
51014MS ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & SOLAR PANEL TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump.
51014MS ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
51014MS ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
51014MS ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I level the water feature? For the water to flow properly, it is critical the water feature is level. If your water feature will be placed in an area with uneven ground, use a level and leveling shims to help level the water feature. Shims are wedge-shaped plastic parts that can be placed between the water feature and the ground to create a level surface. My tube is too long.
www.kenroyhome.