Instructions / Assembly

Use 2 x K and 2 x L to secure fountain body
assembly (B) to basin (A).
51015SLCOP ASSEMBLY INSTRUCTIONS
B
L
K
A
Fill the basin (A) with 1.3 gallons of
distilled water, between the ll lines.
Place pump access door (D) into
basin (A) to cover the entry.
Place decorative river stones (I) onto
top of basin (A).
Connect the light connectors (G) &
(H) and screw the cap tightly.
Plug pump (F) and light transformer
(G) into outlets and turn light on at
switch.
Use shims (J) to level the fountain
as necessary.
Use water guiding pad (M) to brush
the fountain face.
Use metal card (N) to clear water
exit if necessary.
FINAL STEPS
Note: Light does not have to be on to operate pump.
7