Installation Guide

ManualsBrandsKenroy Home ManualsLightingTunis 1-Light Dark Gray Zinc Pendant

ASSEMBLY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY.

MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.

TOOLS: YOU WILL NEED THE FOLLOWING TOOLS OR

EQUIPMENT: LADDER, SCREWDRIVER, ADJUSTABLE WRENCH,

WIRE CUTTERS.

UNPACK THE FIXTURE :

YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE

PACKAGE: CANOPY AND FIXTURE BODY. TO PROTECT THE

FINISH, PLACE ALL PARTS ON A SOFT SURFACE.

MOUNTING HARDWARE PACKAGE:

CROSSBAR, NIPPLE WITH SET SCREW, METAL RING, (2) 8-32

× 1-1/4" SCREWS AND (3) WIRE CONNECTORS.

FIXTURE ASSEMBLY:

1. LOOSE THE SET SCREW ON BOTTOM OF NIPPLE AND

ADJUST THE CORD LENGTH, THEN SECURE THE CORD TO

BOTTOM OF THE NIPPLE BY TIGHTENING THE SET SCREW.

2. CUT OFF THE CORD TO KEEP THE CORD 12" LONGER THAN

THE LENGTH THAT YOU WANT.

3. SPLIT THE END OF THE POWER SUPPLY WIRE 3-1/2"

FROM THE END AND STRIP THE PLASTIC COVER OFF THE

WIRE ABOUT 1/2".

4. INSTALL A 100 WATT MAX. MEDIUM BASE TYPE "A" BULB

(NOT INCLUDED) INTO SOCKET.

COMPLETE INSTALLATION INSTRUCTIONS ON NEXT PAGE.

03/2014 1 LIGHT PENDANT INSTALLATION

SOCKET

METAL

PLATE

GLASS

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY. MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED. TOOLS: YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT: LADDER, SCREWDRIVER, ADJUSTABLE WRENCH, WIRE CUTTERS. UNPACK THE FIXTURE : YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE: CANOPY AND FIXTURE BODY. TO PROTECT THE FINISH, PLACE ALL PARTS ON A SOFT SURFACE.
PAGE 2
INSTALLATION INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS CAUTION: TO AVOID POSSIBLE ELECTRIC SHOCK, MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL. IF YOU ARE REPLACING AN EXISTING FIXTURE, FIRSTLY, TURN THE FIXTURE OFF. NEXT, TURN THE WALL SWITCH OFF. FINALLY, GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME. TURN THE FUSE OR BREAKER TO THE OFF POSITION. SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER. * ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES.
PAGE 3
MODEL NO. 93442DGZ PACKING DIAGRAM (1) FIXTURE PLATE (2) SCREWS & (3) WIRE CONNECTORS & (1) 12MM NIPPLE BUSH WITH CORD GRIP CANOPY ASSEMBLY STYROFOAM: 10 KGS. FIXTURE BODY STYROFOAM: 10 KGS. GLASS STYROFOAM: 10 KGS. STYROFOAM: 10 KGS.
PAGE 4
RRODUCT SPECIFICATIONS 1 OVERALL ASSEMBLED DIMENSIONS HEIGHT: 43.18 CM (17"), WIDTH: 40.60 CM (16") DIA. 1 1 LIGHT: UL LISTED, 100 WATT, MEDIUM BASE E-26 CERAMIC SOCKET WITH STEEL COVER. 1 CANOPY: PAINTED STEEL, 14 CM (5-1/2") DIA. x 3 CM (1 ½") HEIGHT. 1 CORD: UL LISTED, 305 CM (10 FT.) LENGTH, 18 AWG., 3 CONDUCTORS, TYPE SVT CORD, 105°C, BLACK COLOR, WIRES MUST BE LEAD FREE. 1 METAL SHADE: STEEL, OUTSIDE: DARK GREY ZINC, INSIDE: DARK GREY ZINC HEIGHT: 43.18 CM (17"), WIDTH: 40.60 CM (16") DIA.