Instructions / Assembly

Installation instructions (continued)

3. Hanging the fixture body

□ Raise fixture body (C) to the wall and carefully tuck the wires inside the outlet box. spread the electrical

splices so that the black wires are on one side of the outlet box and the white wires are on the other side. line

up screws with holes in backplate and secure with two ball finials (DD).

(Important note: This vanity can be mounted up or down, make sure mount the fixture body (C) to wall as

you desired).

4. Assembling the glass shades

□ Remove the socket rings (A) from the sockets by unscrewing the socket rings (A).

□ Place one glass shade (B) over each socket and secure with one socket ring (A).