Technical data

Execution of Firmware Updates
We are always looking to include innovations of development in our products and to ensure their faultless
operation. Therefor we release updates in regular intervals.
To execute an update pay attention to the following steps.
No
Step
Comment
1
Download the actual version of the Kentix ControlCenter from the
Kentix Website and install it.
Find the software in the „Info & Support“ section under „Software &
Manuals“.
The software works for the BASIC- and PRO-
Version of the AlarmManager and includes all
necessary update components.
2
Start the software and connect to your AlarmManager by entering the
IP-address and user date and clicking „Connect“.
A popup-window appears indicating an existing
firmware update.
3
Start the update process by selecting „Yes“ in the popup-window.
Before the update the AlarmManager starts a download of the actual
configuration and loads it back into the device after the updating is
completed.
Running a firmware update will overwrite all saved
data (except IP-settings) on the AlarmManager.
If the update process fails, restart it by pressing
the „Login“ button again.
4
When the update is finished, login to the AlarmManager with the
default login user data (admin/password). Change the user data of
the first user back to your desired settings.
After Saving, the AlarmManager is on the newest
firmware state with your personal configured data.
Page 18 ! ! ! ! (08-2014, subject to change) kentix.de