Technical data

MultiSensor-Door / MultiSensor-RACK-MINI

The MultiSensor-Door / -RACK-MINI is designed for an efficient intrusion detection on doors or windows or

for a specific environmental monitoring in a server rack.

Depending on its purpose there are two different models:

1. The battery-powered MultiSensor-Door for a flexible application on doors, windows or other moveable

objects.

2. The USB-powered MultiSensor-RACK-Mini for a cabled maintenance-free application (no battery

changes required) e.g. on server-racks.

The two models differ in the alarm signaling (see LED description below), but offer the same functionality.

The MultiSensor-Door / -RACK-MINI is configured via the ControlCenter. Updating the device is not

necessary / possible.

Figure 1: MultiSensor-Door

Figure 2: MultiSensor-RACK-MINI

LED red / green (back of circuit board)

Normal running mode:

LED red!! - blinking 1x per routine message on alarm

LED green! - off

Teach-IN process:

LED green! - long blinking: Teach-in process started

! ! - on: Teach-in process completed

LED red!! - off

Learn button (below plastic clip)

Reed- / Magnetic contact

LED red / green (back of circuit board)

Normal running mode:

LED red!! - short blinking: armed

! ! - off: disarmed

! ! - long blinking: alarm

LED green! - blinking 1x per second when no alarm