Technical data

Introduction and summary
Thank you for your decision to buy a KENTIX monitoring solution based on the KENTIX MultiSensor
technology.
Features
The KENTIX AlarmManager-BASIC/PRO is the central system unit, where all the information of the
MultiSensors are collected. The AlarmManager is installed in the server room or rack. It controls and
forwards all alarm and fault messages to the responsible persons. The configuration is done with a
comfortable PC client - the Kentix ControlCenter. For the connection and installation of the devices you can
choose from two options:
•
Plug‘n Play installation with plug technology - without wiring and jamming
•
Fixed installation with conventional installation cables
Applications
•
Industry and Trade
•
Banks
•
Authorities and hospitals
•
Telecommunications
•
Law firms and medical practices
•
Energy and water utility
Safety note
The installation of the AlarmManager must be run by a competent person.
The sole responsibility for protection against misuse of the SIM card is the card owner. The device allows the
use of a PIN number.
In a power failure, the settings of the AlarmManager are not lost. Energized relays drop out and go back
when the power returns in the unswitched output state.
The device sends power outages directly via SMS. The internal energy supply can protect short-term power
failures for 3-5 minutes. To bridge a longer downtimes, use a suitable UPS system.
Installation
To ensure the security and integrity of the operator and the correct operation of the KENTIX AlarmManager,
the execution of the installation only has to be done by an expert. There must also be ensured, that the
relevant requirements are met.
Environment
The installation must be such that the KENTIX AlarmManager and all associated cables are not affected by
the environmental conditions listed here: dust, humidity, excessive heat, direct sunlight, heat sources,
devices that build strong electromagnetic fields, liquids or corrosive chemicals.
See the technical data sheet for more technical data and environment conditions.
Protection
During the installation of the AlarmManager, certain degrees of protection must be guaranteed. Observe the
relevant regulations for installation in certain environments such as industrial or residential and commercial
buildings.
Page 4 ! ! ! ! (08-2014, subject to change) kentix.de