Technical data

Alarm handling
The Retrigger time defines, after which time the alarms Flicker, Swell or Peak are reset for the next
triggering. This setting avoids that an event which persists for a longer period will lead to a repeated alarming
in short distances of time.
Costs
Value for the costs per kilowatt hour and the monetary unit.
Reset energy consumption
Sets the internal consumption counter of the MultiSensor-RACK back to 0 and deletes all recorded data.
For safety reasons the user password has to be entered before the reset.
Users
Enter data for up to 5 users with individual passwords. The passwords also give access to the switching
function of the PDUs and the digital output 2.
The account data of the first user are in addition the account data of the internal ftp-server for running
updates on the MultiSensor-RACK. For E-Mail alarming enter the addresses of the recipients here.
System
System information
Shows the firmware version numbers of the MultiSensor-RACK.
Find the actual firmware on the Kentix Website in the Software section.
Test functions
Test your E-Mail and SNMP settings via the two test buttons. The E-Mail or Trap sending is logged and can
be checked in the logbook.
Backup configuration
For backup purposes the actual configuration of the MultiSensor can be downloaded to the PC.
Restore configuration
Loads a previously created backup into the device and restarts it. The settings of the backup directly get
active afterwards.
Firmware-Update
Loads a firmware file (image.bin) into the MultiSensor and restarts it.
ATTENTION!
Please note the corresponding release notes of the downloaded update!
Restart
The MultiSensor-RACK can be restarted for testing- or maintenance purposes. Note that the data recording
is suspended for the duration of the restart. The power supply of the connected devices is NOT interrupted
during the restart.
Page 44 ! ! ! ! (08-2014, subject to change) kentix.de