Technical data

KeyPad
The KeyPad is used for arm-disarm switching of the AlarmManager on the ground. The KeyPad is just like
the MultiSensors integrated into the ZigBee© wireless network of the AlarmManager. However, note that the
KeyPad does not work as a router and can not extend the network range.
Note that the KeyPad turns on only after pressing one of the three function keys.
The duty cycle is then about 10 seconds. During this time you can select appropriate functions or
communicate with the ControlCenter.
RF learn button
RFID reader (Legic® or Mifare®)
Optional, depending on type.
Adding a KeyPad
1. For adding a KeyPad to the AlarmManagers configuration start the teach-in process in the Kentix
ControlCenter. Press one of the function buttons and then the „learn button“.
2. Now press one of the function buttons for every 5 seconds. The KeyPad should appear in the list during
the next 15-20 seconds and will be configured automatically.
3. The teach-in process is finished when the KeyPad is marked in the list with a green checkmark.
4. To add the KeyPad to the devices list, click on Apply.
Page 49 ! ! ! ! (08-2014, subject to change) kentix.de