Technical data

Connection examples and installation notes
CompleteSet 1
1. Connect AlarmManager and MultiSensor via
Modular cable.
2. Connect power supply to AlarmManager and
current.
3. Download, install and execute Kentix
ControlCenter.
(Software-Download on www.kentix.de)
4. Enter Kentix-Default-IP-Address
(192.168.100.222) and the default user data
(admin/password) and press „Login“.
(check your own network-settings).
5. Setup IP-Address of AlarmManager in the
Network settings.
6. Add Radio Sensor in „Sensor-Devices“.
7. Make individual setup.
8. Save the Configuration to transfer it into the
AlarmManager.
CompleteSet 2
1. CompleteSet-BASIC 2:
Connect the KIO-Power-Adapter to the power supply and attach the two MultiSensors via Modular
Cable. Follow steps 2 to 8 described for „CompleteSet 1“.
CompleteSet-PRO 2:
Connect the MultiSensor-RF with the AlarmManager or the KIO-Power-Adapter.
Connect the MultiSensor-LAN with a PoE-Switch.
Follow steps 2 to 8 described for „CompleteSet 1“.
2. The KeyPad is added to the configuration like a Radio Sensor.
!! Important: For detection during the setup of the KeyPad it has to be kept active by pressing one of
the function keys for every 5 seconds.
3. Save the Configuration to transfer it into the AlarmManager.
Page 5 ! ! ! ! (08-2014, subject to change) kentix.de