Technical data

Data sheet digital I/O expansion-module (KIO7053)
Page 67 ! ! ! ! (08-2014, subject to change) kentix.de
INPUT dry contact (High=1)
INPUT dry contact (Low=0)
Pin assignment KIO7053
Front
Back
Description
Expansion module for connection to the AlarmManager-PRO.
This module extends the external inputs of the AlarmManager on
additional 16 digital alarm inputs. Communication is via Ethernet, so
the module can be mounted anywhere. The configuration is done in
the software interface of the AlarmManager-PRO. The module
provides a build in web-server with for simple IP configuration and
testing of the inputs and outputs without any additional software.
Connectivity
Connection to Kentix AlarmManager-PRO
External Alarms of existing system equipment
(HVAC, UPS systems, generators, alarm systems, etc.)
Configuration
Build in Web-Server (HTTP), Default IP: 192.168.255.1 (Admin/Admin)
Protocols
KAM-IO communication via IP-PORT: 502 (Default)
Security
ID, Password and IP-Filter
Terminals
Plug-able screw-terminal for cables up to 1mm²
Inputs
Digital dry contacts for potential-free wiring
ON: Open
OFF: Close to GND
Isolation
Ethernet 1,5kVDC, I/O 3,7kVrms
Environment
Operation temperature -25°C to +75°C, Rel. humidity 10–90%
Network
LAN 10/100 Base-TX
Power supply
PoE (Class 1) or externes power supply 12–30VDC, 4.3Watt
Chassis
72 x 123 x 35 mm (DIN-rail mounting)
Content of delivery
KIO7053, Power supply 24VDC, manual
Approvals
CE
Accessories
Power-supply or PoE injector if no PoE supply is available