Owner manual

C Receive channel 1 Bottom C - MIDI note no. 36
Db " " 2
D " " 3
Eb " " 4
E " " 5
F " " 6
Gb " " 7
G " " 8 Selecting a receive channel
Ab " " 9 will automatically put the
A " " 10 MIDI into omni off mode.
Bb " " 11 That is, it will receive on
B " " 12 the selected channel only.
C " " 13
Db " " 14
D " " 15
Eb " " 16 (FACTORY DEFAULT)
E not used
F Omni on mode
Gb not used
G not used
Ab not used
A Ignore received master reset
Bb not used
B not used
C not used Middle C - MIDI note no. 60
Db not used
D not used
Eb not used
E not used
F not used
Gb not used
G not used
Ab not used
A not used
Bb not used
B not used
C not used
Db not used
D not used
Eb not used
E not used
F not used
Gb Triplet clock | Select triplet after the clock speed
G Normal speed clock | Clock settings are not stored.
Ab Half speed clock | On power up the CR68 will
A Quarter speed clock | always return to Normal
Bb Eighth speed clock | clock speed - (no Triplets)
B not used
C not used
Db not used
D Continue message ignored - (FACTORY DEFAULT)
Eb Continue treated as Start (not true continue)
E Ignore MIDI Start and Stop messages
F Respond to MIDI Start and Stop messages - (FACTORY DEFAULT)
Gb not used
G not used
Ab not used
A not used
Bb not used
B not used
C ENTER KEY - Press and release. Top C - MIDI note no. 96