GP IM - 1 6 16 gpi inputs to midi Operating manual
INTRODUCTION Welcome to the GPIM-16 - GPI to MIDI unit. The GPIM-16 is very easy to use, but please take a few moments to read through the manual to avoid any operational difficulties. CONNECTIONS MIDI In This is provided in order that you can ‘daisy chain’ several boxes together. Any data received at the MIDI In socket is merged with any new data generated from the GPI inputs and everything is then sent to the MIDI outs 1 & 2.
EDIT MODE To put the GPIM-16 into edit mode, use a screwdriver or pen to press the recessed edit button. The edit dot will light to show that it is in edit mode. The para dot will also light to show that the required parameter can be changed by using the inc & dec buttons. When the required parameter has been selected, press the mode button. The para dot will go out and the val dot will light to indicate that the value can now be changed by using the inc and dec buttons.
FACTORY DEFAULTS If you want to reset your GPIM-16 to its factory default settings, you can do so by applying power to the unit whilst holding the recessed edit button pressed. `def` (factory defaults) will momentarily be displayed when this has been done.
