THRUTHRU-25 1 into 25 MIDI Thru Box Operating manual
FCC Statement for THRU-25 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Description The THRU-25 has one MIDI Input and twenty-five MIDI Thru ports to enable you to connect several MIDI devices to one MIDI output, without the usual problems encountered when daisy-chaining MIDI devices. The THRU-25 has an opto-coupled MIDI Input and separate drive circuits for each MIDI Thru socket for optimum performance. The THRU-25 also incorporates active circuitry to help restore the quality of signals received at the MIDI Input that may have become degraded by losses in the MIDI cable.
Specification Power Input 9V DC (regulated or unregulated) – never apply more than 12V (never use an unregulated supply greater than 9V as unregulated supplies typically give a higher output than shown) Power 150mA, 2.1mm plug (centre positive) MIDI 1 x In, 25 x Thru Weight 370g (excluding power supply) Dimensions 300 x 54 x 35 mm Power supply Supplied with unit. UK,EU,US or Australian types available. Warranty The THRU-25 comes with a 12 month (from purchase date) back to base warranty, (i.e.
