User Guide
DS-1273ZJ-130(-TRL)
Installation Step:
① Choose the appropriate
wall to fix the bracket
and wire
② Fix cap to bracket and
complete wiring
③ Screw up and fix the cap
④ Take adaptor from the
packaging of bracket
A: Cable entry hole
B: Fastening screw
C: Bayonet of adaptor
⑤ Check the hole site and
fix adaptor to cap
⑥ Connect the cable and fix
dome camera to cap
⑦ Rotate the dome camera
moderately and screw up the
fastening screw
⑧ Installation complete
D: Fastening screw of dome camera
Note: The actual bracket may vary from the picture above.
Wall Mounting Bracket for Dome Camera
(with adaptor plate)
Features:
Aluminum alloy material with surface spray
treatment
The outlet hole makes the feature looks better
Better water proof design
Convenient installation coordinating with lower
bowl
Dimension:
Order Model:
DS-1273ZJ-130(-TRL)
Parameter:
Model
Parameters
DS-1273ZJ-130(-TRL)
Wall Mounting Bracket for
Dome Camera (with adaptor plate)
Appearance
Hik White
Range of
Application
Suitable for dome camera wall mounting
Material
Aluminum Alloy
Dimension
132×183.5×228.5mm
Weight
870g
Notice:
The bracket should be installed on flat wall
The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CE5582P(N)-VFIR3,DS-2CE55A2P(N)-VFIR3,
DS-2CE55C2P(N)-VFIR3, DS-2CC5282P-IT3,
DS-2CC52A2P-IT3, DS-2CC5X2P(N)-IR1(IR3)
DS-2CC51X2P(N)-IR1T(IR3T),DS-2CC5182DP-IR1(IR3)
DS-2CC51X2P(N)-IR1(IR3), DS-2CD2312-I,DS-2CD2332-I
φ132
4-φ8.5
6-M4深8
83.5
46
83.5
158
85.7
228.5
120
183.5
Unit:mm