User's Manual

29
Other Functions
Setting the Clock
When the AC power is connected, “12:00” will
appear on the display. The clock can only be set
while the unit is off.
1. Press the CLOCK / ADJ. button on remote
control, the display will show “Set hour”.
2. Press the or button to adjust the hour
format in (12 or 24HR) .
3. Press the ENTER button on remote control,
the minutes digits begin to fl ash. Press the
or button to adjust the minutes.
4. Press the ENTER button to confi rm. The day
selection begins to fl ash.
5. Press or button to select Sun / Mon /
Tue / Wed / Thu / Fri / Sat.
6. Press the ENTER button to confi rm.
Setting Alarm 1 or Alarm 2
The dual alarms are set in the following
sequence:
• Set Alarm
Set time Set mode
Set day
To enable or disable the alarm:
1. Press the ALARM 1 or ALARM 2 button to
enter the alarm setting sequence.
2. Press the ENTER button when you see “Set
Alarm”.
3. Press the or button to select alarm on
or off and then press the ENTER button to
confi rm.
To set the alarm time:
4. Press the ENTER button when you see “Set
time”.
5. Press the or button to set the hour
and then press the ENTER button.
6. Press the or button to set the minute
and then press the ENTER button.