User's Manual

34
Wall Mounting
The iSymphony W2 wireless main unit and
speakers can be wall mounted using commonly
available wall mounts (not included). You may
purchase these mounting accessories from
many retailers specializing in audio and video
equipment. Please be sure to choose appropriate
surfaces for wall mounting and to follow all safety
and installation instructions included with the
mounting accessories.
To mount the wireless main unit:
• Remove the stand from the unit by fi rmly
depressing the locking tongue on the bottom
rear of the main unit and pulling fi rmly
backwards
• The wireless main unit is compatible with
VESA 75 wall mounts typically used for
mounting small LCD monitors.
• iSymphony recommends using a simple,
fi xed or tilting-only style LCD wall mount.
• Any wall mount used must be capable of
supporting 6 pounds or more.
• The mounting holes on the back of the
wireless main unit are arranged in a square
pattern with 75mm spacing to match the
VESA 75 standard. The mounting holes will
accept only M4 (metric) bolts (not included).
All bolts must be of correct length and be
able to tighten properly when the wall mount
is attached. Be careful not to use bolts that
are too long or too short. If your wall mount
does not include bolts of the correct diameter
or length you can easily buy these parts at a
hardware store.
To mount the wireless speakers:
• Remove the stand from the unit by fi rmly
depressing the locking tongue on top rear of
the stand’s leg and pulling fi rmly downwards
(away from the speaker body)
• The wireless speakers are compatible with
satellite speaker or small bookshelf speaker
wall mounts.
• Any wall mount used must be capable of
supporting 4 pounds or more.
• The mounting holes on the back of the
wireless speakers unit will accept only M4
(metric) bolts (not included). All bolts must
be of correct length and be able to tighten
properly when the wall mount is attached. Be
careful not to use bolts that are too long or
too short. If your wall mount does not include
bolts of the correct diameter or length you
can easily buy these parts at a hardware
store.
Press here and pull down
to remove stand
Press here and pull backwards
to remove stand
Mounting holes
Mounting holes