User Manual

All Information and specification are subject to change without further notice
File Manager, has the memory information and file management.
It shows and allows you to access the internal and external storage memory file
folders that includes the files under them which are either in default or being
created by you under your PC environment.
You can delete a file by calling up the pop-up menu and select the Delete File
option or select Return Main Menu option.
Default, sets to the default factory settings
This allows you to restore all settings to the default factory settings, so please be
sure before confirming to restore.
About, details of the player and lets you personalize the player name by pressing
the button. A soft keypad will be displayed.
In this option, you will see the below items:
- FW / HW Ver: show you the firmware and hardware version used
- MAC: Show you the device MAC address (The device need to
connected to the Wireless AP first before you able to see this MAC
address)
- Int. storage used: show you the internal memory storage status
- microSD card used: show you the external microSD card memory
storage status
- Product support: show you the support web address
- Model no.: show you the name of the model
- Device name: lets you personalize the player name
Using the SD Card
When you would like to use the SD card, please follow the below proper steps:
After turning off the product, insert and slightly press the Micro SD card to the card slot in the correct direction
The SD card will blink every 2 seconds until it is enabled or invalid as shown below:
SD card in Idle state (standby mode)