User Manual

All Information and specification are subject to change without further notice
SD card in enabled state (User can access now)
SD card is invalid and cannot be accessed by this device the card may not be
compatible with the device try to re-insert again.
Removing Micro SD card:
After turning off the product, press the Micro SD card again to remove it.
Glossary
Wi-Fi
Wi-Fi, popularly known as an acronym for wireless fidelity, was originally a brand licensed by the Wi-Fi Alliance to describe the
embedded technology of wireless local area networks (WLAN) based on the IEEE 802.11 specifications. Use of the term has now
broadened to generically describe the wireless interface of mobile computing devices, such as laptops in LANs. Wi-Fi is now
increasingly used for more services, including Internet and VoIP phone access, gaming, and basic connectivity of consumer
electronics such as televisions, DVD players, and digital cameras.
Source - http://en.wikipedia.org/wiki/Wi-Fi
WEP
Wired Equivalent Privacy (WEP) is a scheme to secure IEEE 802.11 wireless networks. It is part of the IEEE 802.11 wireless
networking standard. Because wireless networks broadcast messages using radio, they are susceptible to eavesdropping.
Source - http://en.wikipedia.org/wiki/Wired_Equivalent_Privacy
WPA – Enterprise Version
Wi-Fi Protected Access (WPA and WPA2) is a class of systems to secure wireless (Wi-Fi) computer networks. It was created in
response to several serious weaknesses researchers had found in the previous system, Wired Equivalent Privacy (WEP). WPA
implements the majority of the IEEE 802.11i standard, and was intended as an intermediate measure to take the place of WEP while
802.11i was prepared. WPA is designed to work with all wireless network interface cards, but not necessarily with first generation
wireless access points. WPA2 implements the full standard, but will not work with some older network cards. Both provide good
security, with two significant issues:
Source - http://en.wikipedia.org/wiki/Wi-Fi_Protected_Access
DHCP
DHCP is a set of rules used by communications devices such as a computer, router or network adapter to allow the device to
request and obtain an IP address from a server which has a list of addresses available for assignment.
DHCP is a protocol used by networked computers (clients) to obtain IP addresses and other parameters such as the default gateway,
subnet mask, and IP addresses of DNS servers from a DHCP server. It facilitates access to a network because these settings would
otherwise have to be made manually for the client to participate in the network.
Source - http://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol
SSID