User Manual

ENGLISH

Installation/Connection

Part list for installation

(F) Film antenna (×1) (G) Amplifier unit (cable with

booster, 3.5 m) (×1)

(H) Cable clamper

(×3)

(I) Cleaner (×1)

Determine the antenna installation position

• The direction of the film antenna (F) changes depending on whether the film antenna (F) is

installed on the right side or left side.

• Be sure to check the installation location of film antenna (F) before installing. Film antenna

cannot be re-pasted.

• Separate from other antennas by at least 100 mm.

• Do not paste the amplifier unit (G) on the ceramic line (black part) around the front glass.

Because there is not enough adhesion.

Installing the antenna on the left side Installing the antenna on the right side

(F)

(G)

Ceramic line (black part)

Earth sheet*

* Paste the earth sheet of the amplifier unit (G) on the metal part of the front pillar.

CAUTION

When installing the antenna cable inside the front pillar with the air bag installed

• The front pillar cover is secured with a special clip

which may need to be replaced when it is removed.

Contact your vehicle dealer for details on removing

the front pillar cover and availability of replacement

parts.

Front pillar

Clip

• Install the amplifier unit (G) above the air bag so that

it does not obstruct the operation of the air bag.

(G)

Air bag

Installation overview

The antenna should be installed

on the passenger side for safety.