User Manual

21
15.1 Activated:
Select here on which days the alarm should be activated. The following selection is available: Off/
Daily/Once/Weekend/Week day
Select "Off" to deactivate an activated alarm clock.
15.2 Time:
Set the hours rst with the <UP> or <DOWN> buttons and then the minutes after pressing the
<OK> .
15.3 Mode:
Here you set the audio source with which you want to wake up. The following selection is available:
Buzzer / Internet radio / DAB / FM / CD /USB
15.4 Preset:
The station with which to wake up is specied here. The station last listened to or the stations saved
in the favourites are available here. Does not apply to buzzer, CD or USB mode.
15.5 Volume:
Set the desired alarm volume here.
15.6 Save:
Once you have made all the settings, please press the <OK> button to save the settings.
An activated alarm clock is shown with an alarm symbol and the number of the active alarm clock at
the bottom left of the display. In standby mode you can also see the set alarm time.
15.7 Switching off the alarm clock after waking up
To switch off the alarm clock until the next alarm cycle, please press the <Standby> button on the
device or on the remote control "Alarm off" appears briey on the display. If you only want to inter-
rupt the alarm function for a few minutes (snooze), you can use any other button. The alarm delay
is set by pressing the button <SELECT> in steps 5, 10, 15 and 30 minutes and can also be extended
again and again. After a short time, the radio automatically switches back to "Standby" and the
time remaining until waking up again is displayed next to the ashing alarm symbol.
Note: The saved wake-up times are retained in the event of a power failure.
16. System settings
In the system settings you can change the settings of the radio and call up important information
about the radio.
16.1 Equalizer
With the equalizer you can adjust the sound of the radio to your liking. You can choose from precon-
gured settings or create your own prole. Please proceed as follows: