Instruction manual

English
15
Repeat play
You can play the current track/ le/album or the
whole disc/audio  le repeatedly.
Press REPEAT button in play or pause mode.
Every time the button is pressed, the repeat play
changes in the following order:
For CD :
Repeat mode Icon
Repeat a single track "REP."
Repeat all the tracks *
1
"REP. ALL"
Repeat off
For audio  le :
Repeat mode Icon
Repeat a single file "REP."
Repeat one album *
2
"REP. ALB."
Repeat all the files *
1
"REP. ALL"
Repeat off
• *
1
All tracks/files are repeated continuously.
• *
2
This function cannot be used in program mode.
Changing the display information
Press DISPLAY button in play or pause mode.
Every time the button is pressed, the display
changes in the following order:
For CD :
Information Icon
Status display
The current track elapsed time.
The current track remaining time. "REMAIN"
The whole disc elapsed time. "TOTAL"
The whole disc remaining time. "TOTAL REMAIN"
The whole CD time.
For audio  le :
Information Icon
Status display
Album name and file name.
Tag information (Track, album title and
artist name).
Album number and track number.
Recording on a USB device or SD card
(For CD only)
Records songs in the CD to the USB device or SD card
in MP3 format.
1 Insert a USB device to the USB connector or SD
card on the front panel.
2 To record all the tracks:
Stop playback.
To record a single track:
Play the track to be recorded.
3 Press CD D USB O.T.E. or CD D SD O.T.E. button
to begin recording.
When you stop the recording
Press 7 stop button.
During recording, it is not possible to listen to another source.
The recorded music files and folders accommodating them
are numbered automatically. These number can later be
modified.
– Numbers assigned to folders: AL_A01…AL_A99…AL_Z99
Numbers assigned to music files: A01_001.mp3, A01_002.
mp3…/ A99_001.mp3…/ Z99_001.mp3…
Example
CD-1
v
v.
CD-2
v
;
KWD
;AL_A01
vA01_010.mp3
vA01_001.mp3
;AL_A02
vA02_001.mp3
Music is encoded according to specification below.
– Format: MP3
Transfer bit rate: 192 kbps
– Sampling frequency: 44.1 kHz
Recordable USB device or SD card
– USB standard: USB 1.1/2.0
– SD, SDHC, mimi SD, micro SD/SDHC card
– An SD card of 512 MB to 32 GB can be used.
– File system: FAT 16/32
Program recording (For CD only)
Desired CD tracks can be programmed in the desired
sequence and recorded onto a USB device or SD card.
1 Insert a USB device to the USB connector or SD
card on the front panel.
2 Program the desired sequence of CD tracks.
See page 14 for programming procedure.
3 Press CD D USB O.T.E. or CD D SD O.T.E. button
to begin recording.