Instruction manual

R-K731
60
Set the system clock to the correct time and the day of the week.
Setting the System Clock
Set the time.
Use the [
A
] or [
B
] key to set the “hour”.
4
4
Select "Time Adjust".
Press the [
C
] or [
D
] key.
2
2
Set the day of the week.
Press the [
A
] or [
B
] key.
3
3
Use the [
A
] or [
B
] key to set the "minute".
z
The currently set day of the week and time are displayed.
z
If you make a mistake, repeat the procedure from the beginning.
z
When you want to return to the previous step during the setting procedure,
press the [
C
] key.
z
If there is a power failure or the system is unplugged from the wall outlet for
some time, set the time again.
z
Pressing the [
F
] key on the remote control or on the main unit while the system
is in the Standby mode will display the time for 5 seconds.
z
If the system clock time setting is not correct, the Program Timer will not start
playback at the correct time.
z
As a certain margin of error is allowed for the clock, it is recommended that you
check and adjust the clock at regular intervals.
Press the [MODE] key.
1
1
Press the [ENTER] key.
Press the [ENTER] key.
Press the [ENTER] key.
Press the [ENTER] key.
R-K731_E.indb 60
R-K731_E.indb 60
2011/10/07 14:08:50
2011/10/07 14:08:50