Instruction manual

4
|
Quick Start Guide
Preparations
Canceling the Demonstration
mode
Cancel the Demonstration mode when
you use the unit for the first time after
installation.
 Press[Control]knobtocancelthe
Demonstrationmodewhenthemessage
“TocancelDEMOPressthevolumeknob”
appears(approx.15seconds).
 Turn[Control]knobtoselect“YES”,and
thenpress[Control]knob.
TheDemonstrationmodecanalsobe
canceledintheFunctionSettingmode.
Referto<12-6.Demonstrationmode
setting>inInstructionmanual
Detaching/ Attaching the faceplate
Pressthe
Releasebutton.
!
• Removethefaceplateatonceafter
pressingtheReleasebutton;otherwiseit
canfalldownduetovibration.
• Thefaceplateisaprecisioncomponentof
theunitandcanbedamagedbyshocks
orjolts.
• Keepthefaceplateinitscasewhile
detached.
• Donotplacethefaceplate(andcase)in
areasexposedtodirectsunlight,excessive
heatorhumidity.Alsoavoidplaceswith
toomuchdustorthepossibilityofwater
splashing.
Release
[Control] knob (Volume knob)
B59-2186-00_00_13Stepup_QSG_E_En.indd 4 12/12/17 15:05