Instruction manual

8
|
Quick Start Guide
Listening to the radio/Digital radio
Selecting a tuner source
Press[SRC]toselect“TUNER”or“DIGITAL
RADIO”(KDC-BT73DABonly).Referto
<Sourceselection>(page5).
Selecting a band (FM or AM)
(Tuner only)
Press[R].
Selecting a station/ service
Press[E]or[F].
Theseekmodecanbechanged.Refer
to<9-5.Tunersetting>or<10-9.Digital
Radiosetting>inInstructionmanual
Station preset memory
 Press[R]toselectaband.(Tuneronly)
 Press[E]or[F]toselectthe
station/serviceyouwanttosaveinthe
stationpresetmemory.
 “TUNER”:Press[1/6].
“DIGITALRADIO”:Press[1/6]twice.
Press[1/6]againtoentertheMix
Stationpresetmode.Inthismode,
differentbandsandtunersources(FM,
AM,DigitalRadioetc.)canbesaved
inthesamepresetlayer,whichallows
youtorecalladesiredstationwithout
switchingbetweenbandsand/ortuner
sources.Maximumof6stationscanbe
presetintheMixStationpresetmode.
 Turn[Control]knobtoselectpreset
number(FM/DigitalRadio:“1”–“18”,
AM:“1”–“6”),andthenpressandhold
[Control]knob.
Recalling the stations in the
memory
 Press[R]toselectaband.(Tuneronly)
 Press[1/6].
 Turn[Control]knobtoselectapreset
number(FM/DigitalRadio:“1”–“18”,AM:
“1”–“6”),andthenpress[Control]knob.
IntheMixStationpresetmode,band
namesoftunersourcesaredisplayedas
follows:
FM:FMbroadcaststation
AM:AMbroadcaststation
DR:DigitalRadioservice
[SRC]
[
1
/
6
] [
E
/
F
]
[
R
]
[Control] knob
B59-2186-00_00_13Stepup_QSG_E_En.indd 8 12/12/17 15:06