Instruction manual

MGR-E8 18
Turning On/Off the power
Operation while supplying external power
For long hours of recording or playback, the power can be supplied
externally from the USB port of a PC.
1
Start up the PC
2
Connect a USB cable to the USB port of the PC
3
Switch this unit OFF
Press and hold [Power] until the display is turned off.
4
While holding [7/BACK], connect the USB cable to the USB jack of this
unit
7
/BACK
USB cable
Power
■ To finish operation
5
Switch this unit OFF
6
Disconnect the USB cable from this unit
• The following operations are unavailable during operation using the external
power supply.
- Battery status indication
- Battery recharging
- Control from PC
• When the USB connection, always use a supplied USB cable.
• This unit should be connected directly to the USB port of the PC. We cannot
guarantee the operation if this unit is connected via a USB hub.
B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd 18B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd 18 10/08/04 13:4810/08/04 13:48