User Manual

BASIC OPERATIONS

SWITCHING POWER ON/ OFF

Press the switch to switch the transceiver ON.

Press and hold the switch for approximately 1 second to switch the

transceiver OFF.

ADJUSTING THE VOLUME

Press the ▲ key to increase the volume and the ▼ key to decrease the volume.

SELECTING A CHANNEL

Select your desired channel by pressing a key from 1 to 4.

TRANSMITTING

Note: Before transmitting, first monitor the channel to make sure it is not already in use.

1 Select your desired channel by pressing a channel key (1 ~ 4).

• If the channel is busy, wait until it becomes free.

2 Press the microphone PTT switch and speak into the microphone. Release

the PTT switch when you have finished speaking.

• For best sound quality at the receiving station, hold the microphone approximately

1.5 inches (3 ~ 4 cm) from your mouth.

RECEIVING

1 Select your desired channel by pressing a channel key (1 ~ 4).

2 When you hear a signal, readjust the volume level if necessary.

3 Respond to the call as described in step 2 of “TRANSMITTING”, above.