Operation Manual

You can listen to music from your BLUETOOTH
device, such as portable audio player through the
System.
When you connect your device for the first time, it
is necessary to register (pair) your BLUETOOTH
device and the System.
Connecting a BLUETOOTH device
1
Set the source to “BLUETOOTH”.
.
(Turn)
Main unit
Main unit
Remote control
The “CONNECTING” indicator blinks, and the
“ ” icon (BLUETOOTH icon) flashes slowly.
The System will connect automatically to the
BLUETOOTH device that was last
connected.
“CONNECTED” is displayed and the “ ”
icon (BLUETOOTH icon) lights up.
.
CONNECTED
0
The pairing operation is necessary when
you connect the BLUETOOTH device for
the first time, or connect the System to the
new BLUETOOTH device.
0
When “ ” icon (BLUETOOTH icon) lights
up, cancel the connection once by pressing
and holding the [BLUETOOTH] on the
remote control or [(PAIRING) I/W] on the
System.
“DISCONNECTED” is displayed then the
display disappears.
2
Set the System to pairing standby.
.
(Hold)
Main unit
Remote control
The “ ” icon (BLUETOOTH icon) flashes
quickly.
[I/W] on the main unit cannot be used while
“CONNECTING” is displayed. Use
“PAIRING” on the remote control.
3
Turn on the BLUETOOTH function on the
BLUETOOTH device.
0
Select “Bluetooth” from “Settings” on the
iPod touch/iPhone and Android device.
0
Refer to the instruction manual of your
device for further details.
4
Select “AP-300” from the list of device.
The pairing is completed and the
BLUETOOTH device is connected to the
System automatically.
0
When the target device requests for
password during pairing, enter “0000”.
5
Start playback on the BLUETOOTH
device.
The sound from the BLUETOOTH device is
emitted from the System.
NOTE
0
Up to 9 BLUETOOTH devices can be registered.
When the 10th BLUETOOTH device is
registered, registration of the device with the
oldest connection history is deleted.
0
Some BLUETOOTH devices may not be
available to the System.
23
ENGLISH
Listening to a BLUETOOTH device