Stereo Receiver User Manual
Table Of Contents
- C-V351_V301
- Contents
- Before applying power
- Special features
- System connection
- Controls and indicators
- Setup of the Graphical Remote Control (GRC) unit (For C-V351)
- Remote control of components from the GRC (For C-V351)
- Remote control with the “RC” unit (For C-V301)
- Convenient functions
- Playing music
- Sound adjustment functions
- Recording
- Broadcast reception
- RDS (Radio Data System)
- Functions of RDS
- DISPLAY key
- DISPLAY key
- Receiving a preset RDS station
- Storing radio stations manually in preset memory
- Receiving a preset station
- Receiving all preset stations in order (P. CALL)
- Searching for a desired program type (PTY search)
- Reserving reception of desired kind of programme in advance (EON reservation)
- Ambience effects
- Clock adjustment
- Timer operation
- Set up code chart
- In case of difficulty
- Specifications
21
C-V351/C-V301 (EN)
Convenient functions
One-touch operation and easy operation features
(CD player, cassette deck, and DVD player)
When the system is in standby mode, the operations as de-
scribed below are possible provided that the associated compo-
nents are connected through system control cords.
Function available with the eject key op-
eration
÷ The clock information is displayed in standby mode.
÷ This operation is not available from the eject key of a double cassette
deck.
1 Ensure that system control cords are connected.
2 Set the power switch of the CD player, cassette deck, and
DVD player to the ON position.
3 Set the power switch of the power amplifier to the ON
position.
4 Load the source component with the software to be played.
5 Press the
key of the AV CONTROL CENTER to put it to
standby mode.
Preparations
1 Press the play key.
2 The system is switched from standby mode to ON mode.
3 The input selector is switched automatically.
4 Playback starts.
Function available with the play key op-
eration
1 Press the eject key.
2 The system is switched from standby mode to ON mode.
3 The tray panel of the source component opens.
÷ CD player, cassette deck, and DVD player
Operation available by switching the input
selector
÷ This operation is available when the CD, TAPE 1, MD, LD or DVD input
is selected.
1 Select the desired input with the input selector.
2 The selected source component starts to play.
÷ CD player, cassette deck, and DVD player
÷ Turn on the system before switching the input selector.
÷ Use the main unit keys for operation.