DDX719 DDX7049BT DDX419 DDX4049BT DDX319 DDX3049 MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents Before use ...................................... 3 How to reset your unit .............................................3 INTRODUCTIONS Initial Settings ............................... 5 Initial setup ......................................................................5 Adjusting the panel angle .....................................5 Updating the system.................................................6 Activating the security function.........................7 Component names and functions ....
Before use WARNINGS: (To prevent accidents and damage) • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags. – it may obstruct visibility. • DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look around carefully. • The driver must not watch the monitor while driving. Temperature inside the car...
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
INTRODUCTIONS Initial Settings Adjusting the panel angle Initial setup When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also change the settings on the screen. (☞ page 48) (Only for DDX719/DDX7049BT ) You can change the panel angle. 1 Select an angle (0 – 6). 1 Language Select the text language used for on-screen information. (☞ page 51) Angle Only for DDX719/ DDX7049BT Adjust the panel angle.
Updating the system 4 You can update the system by connecting a USB device containing the update file. 1 Create an update file, copy it to a USB device, and connect it to the unit. To connect a USB device, ☞ page 79. 2 On : It may take a while. If the update has been complete successfully, “Update Completed” appears. Reset the unit. * If the update has failed, turn the power off and then on, and retry the update.
Activating the security function 2 You can activate the security indicator to protect your receiver system against theft. 1 On : The security indicator on the monitor panel flashes when the vehicle ignition is off. To cancel, select . English EN_LVT2268-001A_KR.
Component names and functions DDX719/DDX7049BT Screen (Touch panel) 1 Reset button/Power indicator/Security indicator • Resets the unit. (☞ page 3) • Lights up while the unit is turned on. • Flashes when the security function is activated. (☞ page 7) 2 ATT button (Press) • Attenuates the sound. V.OFF button (Hold) • Turns off/on the screen. (☞ page 11) 3 Volume (down) button (☞ page 11) • Decreases the volume. 4 Volume (up) button (☞ page 11) • Increases the volume.
DDX419/DDX4049BT/DDX319/DDX3049 Screen (Touch panel) Monitor panel 1 Loading slot 2 0 (Eject) button Ejects the disc. 3 Remote sensor 4 Reset button/Power indicator/Security indicator • Resets the unit. (☞ page 3) • Lights up while the unit is turned on. • Flashes when the security function is activated. (☞ page 7) 5 MENU/ button • Turns off the power. (Hold) • Turns on the power. (Press) • Displays the screen. (Press) (☞ page 12) 6 AV/AV OUT button • Displays the current source screen.
Setting the clock 1 Display screen. 4 Set the clock time.
Common operations Turning on the power DDX719/ DDX7049BT Putting the unit in standby DDX419/ DDX4049BT/ DDX319/DDX3049 Turning off the power DDX719/ DDX7049BT DDX419/ DDX4049BT/ DDX319/DDX3049 (Hold) (Hold) Adjusting the volume To adjust the volume (00 to 35) Turning off the screen DDX719/DDX7049BT DDX719/DDX7049BT Decrease Increase DDX419/DDX4049BT/DDX319/DDX3049 Decrease (Hold) Increase DDX419/DDX4049BT DDX319/DDX3049 To attenuate the sound DDX719/ DDX7049BT DDX419/ DDX4049BT/ DDX319/DDX3
Switching screens Source control screen • Changes the AV source. • Displays the screen. Changes the detailed settings. You can select 3 items to be displayed in this area. (☞ page 13) Changes the page ☞ page 11 Press [ ] to return to the previous screen. Touch screen operation Displays the video control menu while playing a video. Goes to the previous chapter/track.* Goes to the next chapter/ track.* Displays the source control screen while playing a video.
AV SOURCE OPERATIONS Selecting the playback source DDX719/DDX419/DDX319 *1 *2 DDX7049BT/DDX4049BT/DDX3049 *1 *2 NAV*3 (☞ page 40) DISC (☞ page 15) TEL *4 (☞ page 57) USB (☞ page 22) iPod *5 (☞ page 24) TUNER (☞ page 29) AV-IN 1/AV-IN 2 *5 (☞ page 39) Bluetooth*4 (☞ page 61) PANDORA*6 (☞ page 27) SiriusXM*6 (☞ page 32) Displays the navigation screen when a navigation unit is connected. Plays a disc. Displays the phone control screen. Plays files on a USB device. Plays an iPod/iPhone.
Displaying the source control screen On each playback screen, perform the following: DDX719/DDX7049BT or DDX419/DDX4049BT/DDX319/ DDX3049 (Hold) • For DDX719/DDX7049BT, pressing and holding TEL hides the operation buttons. For DDX419/ DDX4049BT/DDX319/DDX3049, pressing FNC/R-CAM hides the operation buttons. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds. 14 DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049 EN_LVT2268-001A_KR.
Disc operations Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. Inserting a disc DDX719/DDX7049BT Label side DDX419/DDX4049BT/DDX319/DDX3049 Label side To eject a disc DDX719/DDX7049BT DDX419/DDX4049BT/DDX319/DDX3049 • You can eject a disc when playing another AV source.
Playable disc types Disc type Recording format, file type, etc Playable 1 DVD DVD-Video * Region Code: • For DDX719/DDX419/DDX319: 1 • For DDX7049BT/DDX4049BT/DDX3049: 4 DVD Recordable/ Rewritable (DVD-R/-RW *2, +R/+RW *3) • DVD Video: UDF bridge • DVD-VR • DivX *5/MPEG1/MPEG2/ JPEG/MP3/WMA/WAV/ AAC: ISO 9660 level 1, level 2, Romeo, Joliet DVD-Video Dual Disc DVD side CD/VCD DTS-CD/Audio CD/CD Text (CD-DA) DVD-Audio/DVD-ROM DVD-VR *4 DivX *5/MPEG1/MPEG2 JPEG MP3/WMA/WAV/AAC MPEG4/DVD+VR/DVD-RA
Playback operations To display the source control screen, ☞ page 14. For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Playing time Media type • DVD Video: Title no./Chapter no. • DVD-VR: Program no. (or Playlist no.)/Chapter no.*1 • DivX/MPEG1/MPEG2: Folder no./Track no. • JPEG: Folder no./File no. • VCD: Track no. File type (for DivX/MPEG1/MPEG2/JPEG) Playback mode [ ] [ ]*2 [3 8] [7]*3 [4] [¢] Selects playback mode. (☞ page 20) Starts/Pauses playback. Stops playback. • Selects chapter/track.
To display the source control screen, ☞ page 14. For CD/MP3/WMA/WAV/AAC Track/file information • Pressing [<] scrolls the text if not all of the text is shown. Media type Playing time Playback status (3: play / 8: pause ) • MP3/WMA/WAV/AAC: Folder no./Track no. • CD: Track no. File type Playback mode While playing, the jacket picture is shown if the file has the tag data including the jacket picture. [ ][ ] [ ] *1 [3 8] ][ [ Selects playback mode. (☞ page 20) Displays folder/track list.
Video menu operations You can display the video menu screen while watching the playback pictures on the screen. • Available items on the screen differ depending on the types of the loaded disc and playback files. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds. • The screen for MPEG1/MPEG2 differs from the above. [Audio] Selects the audio type. • For DVD-VR: Selects the audio channel (ST: stereo, L: left, R: right).
Only for VCD • To deactivate the PBC function, press [7] then the direct selecting buttons to select a track number. 1 Selecting playback mode For DVD/DVD-VR 2 Selects Repeat playback mode For VCD (without PBC)/CD/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC Direct selecting buttons (☞ below) [Audio] [Return] [MENU] [Picture Adjust] [Aspect] [ZOOM] [Direct] Selects the audio channel (ST: stereo, L: left, R: right). Displays the previous screen or the menu. Displays the disc menu.
Settings for disc playback For DVD/DVD-VR Disc Setup items Selectable setting/item Initial: Underlined Menu Language Select the initial disc menu language; Initial English (☞ page 70). Subtitle Language Select the initial subtitle language or erase the subtitle (OFF); Initial English (☞ page 70). • Initial for DDX7049BT/DDX4049BT/DDX3049: English, for DDX719/ DDX419/DDX319: OFF Audio Language Select the initial audio language; Initial English (☞ page 70).
USB operations Playing a USB device • This unit can play JPEG/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC files stored in a USB mass storage class device. • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Make sure all important data has been backed up to avoid losing the data. Connecting a USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit.
To display the source control screen, ☞ page 14. While playing, the jacket picture is shown if the file has the tag data including the jacket picture. Track/file information (for MP3/WMA/WAV/ AAC) • Pressing [<] scrolls the text if not all of the text is shown. Playing time Playback status (3: play / 8: pause ) • MP3/WMA/WAV/AAC: Folder no./Track no. • JPEG: Folder no./File no. Playback mode File type [ ] Selects repeat playback mode. *1*2 • REP: Repeats current track.
Listening to the iPod/iPhone device Preparation • Connect iPod/iPhone. (☞ page 79) • Use the following cables: – To watch the video and to listen to the music (analog): USB Audio and Video cable for iPod/iPhone—KCA-iP22F/KCAiP202 (optional accessory) – To listen to the music (digital): USB Audio cable for iPod/iPhone—KCA-iP102 (optional accessory) • Do not use extension cables.
iPod/iPhone playback operations To display the source control screen, ☞ page 14. • Select “iPod” as the source. (☞ page 13) • The operations explained in this manual are under the condition when the unit is selected for controlling playback. (☞ below) Song/video information • Pressing [<] scrolls the text if not all of the text is shown. While playing, Artwork (the picture displayed on the screen of iPod/iPhone) is shown if the song contains the Artwork.
Selecting a track/video from menu on the iPod/iPhone Operating in iPod/iPhone control mode You can play back the audio/video using iPod/iPhone itself instead of the unit. 1 Audio: 2 Select the menu (Music or Video) (1), a category (2), then a desired item (3). • Select the item in the selected layer until a desired track starts playing.
PANDORA® operations (Only for DDX719/DDX419/DDX319) • You can operate PANDORA using the remote controller. Only playing, pausing, and skipping are available. • Install the latest version of the PANDORA® application on your iPhone. The picture data is displayed if available from the current content. Song information • Pressing [<] scrolls the text if not all of the text is shown. Playing time Playback status (3: play / 8: pause ) [ [ ] ] [38] Displays the Stations list.
About Pandora® internet radio The requirements for listening to Pandora are as follows: • Use an Apple iPhone or iPod touch running under iOS3 or later. • Search for “Pandora” in the Apple iTunes App Store to find and install the most current version of the Pandora® application on your device. • In the application on your device, log in and create an account with Pandora. (If you are not already a registered user, an account can also be created at www. pandora.com.
Listening to the radio Text information Scrolls the text information ST indicator TI indicator Seek mode indicator • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. [P1] – [P6] • Turns in the preset station. (Press) • Presets the currently tuned station. (Hold) [Mode] Displays tuner setting screen. (☞ page 30) [TI] Activates/deactivates TI standby reception mode. (☞ page 31) [Mono] * Activates/deactivates monaural mode for better FM reception.
Displaying the information of the current station Manual presetting 1 Tune in to a station you want to preset. (☞ page 29) 2 Select a preset number. (Hold) The station selected in step 1 is stored. The station frequency currently tuned in/PS (station name) for FM RBDS when PS signal is coming in Displays the text information Selecting a preset station Preset list Storing stations in memory You can preset six stations for each band.
The following features are available only for FM RBDS stations. Activating/deactivating TI Standby Reception Searching for FM RBDS program—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code for your favorite programs. 1 TI indicator TI indicator Lights in white Lights in orange 2 Select a PTY code. (Hold) Goes off TI Standby Reception The unit will temporarily switch to Traffic Information (TI) if available. Not yet activated.
Listening to the SiriusXM™ Satellite Radio (Only for DDX719/DDX419/DDX319) Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. To start listening to the SiriusXM™ Satellite Radio, A SiriusXM Vehicle Tuner (sold separately) and Subscription are required. For more information, visits www.siriusxm.com. Text information Scrolls the text information [P1] – [P6] • Tunes in the preset channel.
Radio activation SiriusXM Satellite Radio operation requires the connection of the optional SiriusXMConnect Vehicle Tuner (sold separately). To activate the SiriusXM Vehicle Connect tuner, you will need the Radio ID. 3 When the following screen appears, press [Enter]. 1 Make a note of your Radio ID. For each SiriusXM Vehicle Connect tuner, peculiar Radio ID is assigned. To confirm your Radio ID, tune to channel 0. • The letters I, O, S and F are not used in any Radio ID.
Displaying the information on the current channel Selecting a preset channel Selecting a channel directly 1 Band no./ Radio ID* (or Preset no. if the current station is preset)/ Channel no. Displays the text information Preset list * The Radio ID is displayed when the channel is set to 0. Storing channels in memory You can preset six channels for each band. (24 in total) 1 Tune in to a channel you want 2 to preset. (☞ page 32) Select a preset number. 2 Enter a channel no. (1), and then confirm (2).
Displaying information on channels Channel List Select a category (1) and then a channel (2). You can obtain information on channels or select a category and then a channel. 1 2 Select [Preset List] or [Channel List]. 3 – To list all the channels, select [All Channels]. – Pressing the info change button under the list displays information in the following order: Channel Name = Artist Name = Song Title = Content Info Info change button Preset List Select a band (1) and then a preset channel (2).
Using the Instant Replay function You can temporarily record up to 30 minutes of the broadcast from the current time, and replay the recorded data. • If you change to another channel during playback, the recorded content will be lost. • When the recording time reaches 30 minutes, the older recorded data is deleted and recording continues.
Setting the reception restrictions Display the SiriusXM Mode screen to configure the settings. Setting the parental lock You can set the parental lock or parental mature lock in order to, for example, restrict children from receiving adult channels. Setting/Changing the parental code • Changing the code does not change the Parental Mature Lock/Parental Lock Channel/Channel Skipping settings. 1 3 Enter a four-digit code (1), and then confirm (2). • To clear the entry, press [Clear].
Activating the parental lock on each channel This parental control option allows you to pick the channels to be locked by the parental control feature. 1 Skipping unwanted channels If you do not want to receive some channels, you can skip them. Activating the channel skipping 1 2 Enter the parental code. 3 Select a category (1) and then a channel (2). • To list all the channels, select [All Channels]. • A checkmark appears beside the selected channel.
Using other external components To display the source control screen, ☞ page 14. AV-IN name ( ☞ below) [Mode] [MENU] Changes the AV-IN name. • Press [2] or [3] to select an AV-IN name. • This setting does not affect the source name “AV-IN 1”/ “AV-IN 2” displayed on . Displays screen. AV-IN You can connect an external component to the AV-IN terminal. Preparation: If you want to use AV-IN2, select for setting.
Using the external navigation unit (Only for DDX7049BT/DDX4049BT/DDX3049) You can connect a navigation unit (KNA-G610/KNA-G630: optional accessory) to the navigation input terminal so that you can view the navigation screen. (☞ page 80) The navigation guidance comes out through the front speakers even when you listen to an audio source. To view the navigation screen 2 On : or On any screen: 3 The navigation screen is activated.
Sound adjustment Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR – VCD/CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC • You cannot adjust the sound when the unit is in standby. Selecting a preset sound mode 1 On : Storing your own adjustment Customizing preset sound mode 1 Select a sound mode.
Adjusting the sound precisely 1 Perform steps 1 and 2 of “Selecting a preset sound mode,” then... Adjusting the cross over frequency 1 On : 2 2 3 Adjust the sound of each band. Changes level of Bass/ Middle/Treble to 0. Frequency Selects frequency. Level Adjusts level. Q Factor Adjusts the width of the frequency. Bass EXT Activates/deactivates bass. SW Level Adjusts subwoofer level.* 3 Select the item to adjust, then make adjustment.
Changing the display design You can change the background and panel color. 1 To select a panel color On : Variable color illumination • Illumination color changes gradually. 2 For making your own color adjustment, ☞ below Making your own color adjustment • You can make your own color adjustment only when is selected. 3 Select an item to change 1 ( or ). 2 4 Select a background/panel color.
Using your favorite scene as the background While playing a video or JPEG, you can capture an image and use the captured image as a background. • You cannot capture copyrighted content and images from iPod/iPhone. • When using a JPEG file as the background, make sure that the resolution is 800 x 600 pixels. • The color of the captured image may look different from that of the actual scene. 1 Play back a video or JPEG. 2 Display . (☞ page 43) 3 4 Adjust the image.
Setting for video playback You can change the setting for video playback. Picture adjustment You can adjust the picture quality. 1 Display the adjustment menu. 3 Adjust the picture (–15 to +15). Adjusts the brightness Adjusts the contrast Adjusts the black Adjusts the color Adjusts the tint* Adjusts the sharpness * Adjustable only when the incoming signal is NTSC. 2 Select dimmer on () or off (). English EN_LVT2268-001A_KR.
Changing the aspect ratio You can change the aspect ratio for video playback. 1 * While DivX is played back with set to <16:9> (for disc: ☞ page 21/ for USB: ☞ page 23), the aspect ratio is not set correctly. Zooming picture You can zoom the picture ( to ). • When is set to or (☞ left column), the picture is zoomed with the aspect ratio of the setting.
Using a rear view camera • To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera, ☞ page 80. Activating the rear view camera 1 On : Displaying the picture from the rear view camera The rear view screen is displayed when you shift the gear to the reverse (R) position. 2 • To erase the caution message, touch the screen. 3 To display the picture from the rear view camera manually DDX719/ DDX7049BT To deactivate, select .
Setting menu items • You cannot change
Menu item Dimmer Selectable setting/item ♦ Auto ♦ ON ♦ OFF ♦ NAV Initial: Underlined : Dims the screen and button illumination when you turn on the headlights. • The ILLUMI lead connection is required. (☞ page 78) : Activates dimmer. : Cancels. : Activates or deactivates dimmer according to the day/night display setting of the connected navigation unit. User Customize Change the display design (background and panel color).
Menu item Selectable setting/item R-CAM Interrupt ♦ ON Input AV Input ♦ OFF 50 Initial: Underlined You can determine the use of AV-IN input terminal. ♦ AV-IN2 : Select to play an AV component connected to the AV-IN input terminal. ♦ iPod : Select when connecting the iPod/iPhone using the USB Audio and Video cable for iPod/iPhone. (☞ page 24) : Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. : Cancels.
Menu item System Language * Selectable setting/item Initial: Underlined Select the text language used for on-screen information. ♦ English/Spanish/French/German/Italian/Dutch/ Russian/Portuguese/Chinese-Simplified/ChineseTraditional/Thai/Turkish/Arabic/Persian/Hebrew/ Greece/Indonesia • For external monitors, only English/Spanish/French/German/ Italian/Dutch/Russian/Portuguese are available. If another language has been selected, the text language for external monitors will be set to English.
Memorizing/recalling the settings You can memorize the settings changed in the menu and recall the memorized settings anytime. • The memorized settings are kept even when the unit is reset. 1 Locking the settings You can lock the settings to prevent them from being changed. • is shown beside the settings that can be locked. 1 On : On : 2 2 To unlock the setting, press [Unlock]. Adjusting the touch position • To cancel, press [No]. 3 Select an operation.
BLUETOOTH OPERATIONS (Only for DDX719/DDX7049BT/DDX419/DDX4049BT) Information for using Bluetooth® devices • While driving, do not perform complicated operations such as dialing the numbers, using phonebook, etc. When you perform these operations, stop your car in a safe place. • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device. • This unit may not work for some Bluetooth devices. • Connecting condition may vary depending on circumstances around you.
Connecting Bluetooth devices Connecting a new Bluetooth device for the first time When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate each other. To make pairing, you may need to enter the PIN (Personal Identification Number) code of your Bluetooth device you want to connect. • Once the connection is established, it is registered in the unit even if you reset the unit.
3 4 • All registered devices (mobile phone and audio player) are listed on . – Selectable items depend on the device you are operating. To disconnect Cancel 5 Operate the Bluetooth device A confirmation message appears. Press [Yes]. to connect. “Connected” appears. Press [OK] to confirm the operation. Now connection is established and you can use the Bluetooth device through the unit.
Using the Bluetooth mobile phone Adjusting the volume of microphone Receiving a call When a call comes in... Rejects the call Call information (if acquired) Status of the device/Battery reminder (only when the information comes from the device) • Phone operation is not available while the picture from the rear view camera is displayed. (☞ page 47) When is set to The unit answers the incoming call automatically. (☞ page 62) While talking...
Making a call 1 Direct number entry Deletes last character On : Hold: Adds “+” 2 Select a method to make a call. Phonebook/Call lists (☞ page 58) Direct number entry (☞ the right column) Presets the entered phone number on the preset list (☞ page 59) • You can enter up to 32 numbers. Voice Dialing • Available only when the connected mobile phone has the voice recognition system. Preset list (For presetting, ☞ page 59) Voice dialing (☞ the right column) Speak the name you want to call.
Using the phonebook/call lists 1 2 Select the initial. If the initial is not a letter or number, press [Others]. Outgoing From dialled call list. Incoming Missed Phonebook From received call list. From missed call list. From phonebook. • For copying the phonebook, ☞ page 59. 3 Select a phone number from the list. To display the details of an entry When is selected... 1 Press the right arrow icon of an entry.
Presetting the phone numbers You can preset up to 6 phone numbers. 1 On : Copying the phonebook You can copy the phonebook memory of a mobile phone into the unit (up to 400 entries). 1 2 Select an item from phonebook/call lists. On : 2 3 3 Select a phone number. (Hold) 4 Select a preset number to store. • You can also preset the phone number entered on screen by pressing [Preset].
Deleting the phone number entries in the unit 1 Display the phonebook/call list you want to delete. (☞ page 58) 2 About mobile phones compatible with Phone Book Access Profile (PBAP) If your mobile phone supports PBAP, the phonebook and call lists are automatically copied to the unit when the mobile phone is connected.
Using the Bluetooth audio player • To register a new device, ☞ page 54. • To connect/disconnect a device, ☞ page 55. Tag data (current track title/ artist name/album title) * • Pressing [<] scrolls the text if not all of the text is shown. Playing time * Playback status * (3: play / 8: pause) Battery reminder (only when the information comes from the device) • The operation buttons, indications and information displayed on the screen differ depending on the connected device.
Menu items Selectable setting/item Connection ♦ Connect : ☞ page 55 ♦ Disconnect : ☞ page 55 PIN Code Changes the PIN code of the unit. • Enter a new PIN code, then press [Enter]. Initial: Underlined Device Name Shows the device name to be shown on the Bluetooth device — “KENWOOD BT MM-6U2.” Device Address Shows the device address of the unit. Phone Device*1 Shows the connected phone device name. Audio Device*2 Shows the connected audio device name.
USING THE REMOTE CONTROLLER Overview DDX7049BT/DDX4049BT/DDX3049: This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. DDX719/DDX419/DDX319: Optional Remote Controller KNA-RCDV331 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller. CAUTION • Put the Remote Controller in a place where it will not move during braking or other operations.
Operations from the remote controller Common operations (AUD mode) Source switching Switches to the source to be played. Hangs up the incoming/current call. ENTER Enters options. Hands-free communication When a call comes in, it answers the call. Volume control Adjusts the volume. Function Switches the function screen. Volume attenuating Press the key once to lower the volume. Press again to restore the previous volume. NAV/V.SEL Switches to the navigation screen.
DVD/VCD (DVD mode) Track search and file search Selects the track or file to be played. VCD 1.X, VCD 2.X (PBC OFF) Track number Cancel VCD 2.X (PBC ON) Track number Cancel Play/Pause Pauses the track. Press again to resume playing. Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [ENTER] key. Numeric keypad Stop Memorizes the last point where the disc stopped. • Specify the number to search in direct search.
SUBTITLE Switches the subtitle language. ZOOM Switches the zoom ratio each time you press this key. Track search and file search Selects the track or file to be played. Play/Pause Pauses the track. Press again to resume playing. Direct search Picture Angle Switches the picture angle each time you press this key. Pressing this key switches the features that can be searched directly. Music Disc AUDIO Switches Voice Language. Switches the voice language each time you press this key.
Radio/SiriusXM (AUD mode) Band switching Switches to bands received by the unit. • To use preset tuning, press the number of a programmed broadcast station. ( 1 – 6 ) • Press the direct tuning key first, then specify the frequency of the station to receive. MNO iPod (AUD mode) Station selection Switches to broadcast stations received by the unit. Music/Video search Selects the music/video to be played. Seek mode switching Switches the Seek mode (AUTO1, AUTO2, MANU). Play/Pause Pauses the music/video.
REFERENCE Maintenance Caution on cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. Moisture condensation Moisture may condense on the lens inside the unit in the following cases: • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the unit may malfunction.
More about this unit File playback Playing DivX files (Only for DDX7049BT/DDX4049BT/DDX3049) • This unit can play back DivX files with the extension code <.divx>, <.div>, or <.avi> (regardless of the letter case—upper/ lower). • Audio stream should conform to MP3 or Dolby Digital. • The file encoded in the interlaced scanning mode may not be played back correctly. Playing MPEG1/MPEG2 files • This unit can play back MPEG1/MPEG2 files with the extension code <.mpg>, <.mpeg>, or <.mod>.
Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/Front Preout/Rear Preout) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components).
Pandora (Only for DDX719/DDX419/DDX319) Message Remedy/Cause “Cannot Skip” No more songs can be skipped. “Rating Failed” Thumb-up/-down is prohibited. “No Station” No station is available. “No Active Station” No station is being played. SiriusXM (Only for DDX719/DDX419/DDX319) Message “Check Tuner” Remedy/Cause The SiriusXM Tuner is disconnected or the unit is having trouble communicating with the Tuner. Connect the Tuner or check the Tuner connection to the back of the unit.
If there seems to be a problem AV-IN DivX/MPEG1/MPEG2/ JPEG/MP3/WMA/WAV/AAC Disc in general TUNER General Symptom Remedy/Cause No sound comes out of the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. No picture is displayed on the screen. Turn on the screen. (☞ page 11) The unit does not work at all. Reset the unit. (☞ page 3) The remote controller* does not work. Replace the battery. AME automatic presetting does not work. Store stations manually.
USB iPod/iPhone Symptom 74 Remedy/Cause No sound comes out of the speakers. • Disconnect the iPod, then connect it again. • Select another source and then reselect “iPod”. The iPod/iPhone does not turn on or does not work. • • • • Sound is distorted. Deactivate the equalizer either on this unit or the iPod/iPhone. A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of the iPod. For details, visit .
Bluetooth (only for DDX719/DDX7049BT/DDX419/DDX4049BT) Symptom Remedy/Cause Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit.
Accessories/Installation Procedure 7 Reconnect the - battery. 8 Press the reset button. 9 Perform the Initial Setup. Accessories 1 6*1 2WARNING • If you connect the ignition wire (red) and the ..........1 2 ..........2 7*2 ..........1 (2m: 6.5 ft) 3 ..........2 8*2 ..........6 4 After the Installation After the installation, perform the Initial Setup by referring to the instruction manual. ..........
• Insulate unconnected wires with vinyl tape or • • • • • • other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car.
Connecting Wires to Terminals Subwoofer Preout (monaural) Bluetooth Microphone (Accessory 9) DDX719/ DDX7049BT/DDX419/DDX4049BT only Purple/White (Reverse sensor wire) C onnect to vehicle's reverse lamp harness when using the optional rear view camera. Extension cable (Accessory 2) Light Green Antenna Cord (Parking sensor wire) For best safety, be sure to connect the parking sensor. ⁄ FM/AM antenna input Connect to the vehicle's parking brake detection switch harness.
Connecting a USB device/iPod/iPhone For DDX719/DDX7049BT iPod (commercially available) USB device (commercially available) CA-U1EX (Optional Accessory) USB terminal (0.8 m) KCA-iP202 (Optional Accessory) (1.
Connecting Other Products Navigation System (Optional Accessory) DDX7049BT/DDX4049BT/DDX3049 only Navigation units that can be connected to this unit. (As of December, 2011): • KNA-G610 • KNA-G630 For latest information, access the www.kenwood.com/cs/ce/. Rear View Camera Input • Visual input (Yellow) ⁄ Audio/Visual Output • Visual output (Yellow) • Audio output (3.
Installing/Removing the Unit Installing the Unit Installing the Escutcheon 1 Attach accessory 5 to the unit. B end the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Accessory 5 For more stable attachment the unit (DDX719/ DDX7049BT only) Bracket Removing the Escutcheon (DDX419/DDX4049BT/ DDX319/DDX3049 only) 1 Engage the catch pins on the removal tool 6 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure.
Removing the Unit (DDX419/DDX4049BT/ DDX319/DDX3049 only) 1 Remove the escutcheon by referring to the removal procedure in the section . 2 Insert the two removal tools 6 deeply into the slots on each side, as shown. Accessory 6 Installing the Microphone Unit (DDX719/DDX7049BT/ DDX419/DDX4049BT only) 1 Check the installation position of the microphone (accessory 9). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone.
Specifications Monitor section Picture Size : 6.95 inches (diagonal) wide 156.6 mm (W) × 81.6 mm (H) (DDX719/DDX7049BT ) : 6.1 inches (diagonal) wide 136.2 mm (W) × 72 mm (H) (DDX419/DDX4049BT/DDX319/ DDX3049) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H × 480V × RGB) Effective Pixels : 99.
FM tuner section Frequency Range 200 kHz: 87.9 MHz – 107.9 MHz (DDX719/DDX419/DDX319) 50 kHz: 87.5 MHz – 108.0 MHz (DDX7049BT/DDX4049BT/DDX3049) Usable Sensitivity (S/N: 30 dB) : 9.3 dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N: 50 dB) : 15.2 dBf (1.6 μV/75 Ω) Frequency Response (± 3.
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • The “AAC” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • Manufactured under license under U.S.
KS-UBT1 (USB Bluetooth Adapter) Instruction Manual Specifications CAUTION Changes or modifications not approved by us could void the user’s authority to operate the equipment. • This adapter has been designed exclusively for use with Kenwood car receivers. Do not use this adapter with any other car receiver. For details, see also the Instructions supplied with your receiver. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
LVT2268-001A_KR_cover.