KDV-U4349 KDV-U4349M KDV-U4449 DVD-RECEIVER INSTRUCTION MANUAL © 2011 Kenwood Corporation All Rights Reserved.
Contents Before use 3 For first use 7 Before using this unit for the first time Language Setup DSP Setup Basic Operation of control panel 8 General functions Tuner functions DVD/ USB/ iPod play functions Function Control/ Setup Menu 10 Clock/ Display Settings 14 Basic Operations of Remote Control 30 31 Accessories/ Installation Procedure 34 Connecting Wires to Terminals 35 Installation/Removing the Unit 36 Troubleshooting Guide 37 Specifications 39 15 Frequency Step Setting Disc/ USB
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. How to reset your unit • If this unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. • If you experience problems during installation, consult your Kenwood dealer.
Before use List of playable discs Disc types DVD CD Others About Audio files Standard Support DVD Video DVD Audio DVD-R ‡ × ‡ DVD-RW ‡ DVD+R ‡ DVD+RW ‡ DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM Music CD CD-ROM ‡ ‡ × ‡ ‡ CD-R ‡ CD-RW ‡ DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA × ‡ × × % HDCD % CCCD DualDisc Super audio CD × × % Remark DTS not supported.
About Picture files About USB device • Acceptable picture files JPEG • Extensions jpg, jpeg • Acceptable media CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB device Acceptable discs, disc formats, USB device file system, file and folder names and playing order are the same as those for audio files. See . • In this manual, the word “USB device” is used for flash memories and digital audio players which have USB terminals.
Before use Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
For first use Before using this unit for the first time Demonstration mode setting This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode setting. Display “DEMO ON” “DEMO OFF” Setting The Demonstration mode function is ON. Cancel Demonstration mode (Normal mode). TV system selection You must select the appropriate system mode for your TV system.
Basic Operation of control panel [SRC] Release [ ] [FM+] [AM–] [DISP] [AUD] Disc slot [4] [¢] [0] USB Terminal [1] [2] [3] [4] [5] [6] Auxiliary input General functions Tuner functions Power/Source Select button: [SRC] Turns on the power. When the power is on, the source switches between Tuner (“TUNER”), USB or iPod (“USB” or “iPod”), DVD (“DVD”), Auxiliary input (“AUX”), and Standby (“STANDBY”) each time this button is pressed. Press at least 1 second to turn off the power.
DVD/ USB/ iPod play functions Disc play: Disc slot Starts playing when a disc is inserted. When a disc is inserted, the “IN” indicator is ON. ⁄ • Do not attempt to insert a disc into the slot if another one is already there. • The unit can only play 12 cm (5 inch) discs. If you insert an 8 cm (3 inch) disc, it will get stuck inside and can cause the unit to malfunction. Disc ejection: [0] ⁄ • You can eject the disc for 10 minutes after switching off the engine.
Function Control/ Setup Menu Function Control Functions in the table below can be set up by using Function Control. 1 Enter Function Control mode Press the [ ] button for at least 1 second. “FUNCTION” is displayed. Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed. : Can be set in other than standby state. : Can be set in standby state. : Can be set only during playback of the iPod source.
Item “ZONE2” Setting “F”/ “R”* Entry Setting overview “AUTO1”/ “AUTO2”/ “MANUAL” “CRSC” “NAME SET” “P/N” “AUTO1”*/ “AUTO2”/ “MANUAL” “OFF”/ “ON”* 4/ ¢ Specifies the destination of sub source sound when the Dual Zone function is turned on. Selects the tuning mode of the radio. 4/ ¢ Switches to Monaural to decrease noise when reception is poor. 4/ ¢ Condition Page 32 31 — 14 — 1 sec. Sets the display when switched to AUX source.
Function Control/ Setup Menu Setup menu of remote control By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. 1 Select DVD or USB source Press the [SRC] button. Select the “DVD” or “USB” display. 2 Press the [7] button. 3 Enter Setup menu mode Press the [SETUP] button. 5 Press the [5]/[∞] button to select the desired item, and then press the [ENTER] button.
LANGUAGE Item MENU LANGUAGE/ AUDIO LANGUAGE SUBTITLE ON SCREEN LANGUAGE Setting Selects the initial disc menu language and audio language. Refer to the language code list (page 33). Selects the initial subtitle language or remove the subtitle (OFF). Refer to the language code list (page 33). Selects a language for the setup menu and on screen display. PICTURE Item MONITOR TYPE OSD POSITION iPod ARTWORK Setting • 16:9: Select when a 16:9 wide TV is connected.
Clock/ Display Settings Manual Clock Adjustment 1 Select the Clock display Press the [DISP] button. 2 Enter Clock adjustment mode Press the [DISP] button for at least 1 second. The clock display blinks. 3 Adjusting Clock Operation type Adjust the hours Adjust the minutes Operation Press the [FM+] or [AM–] button. Press the [4] or [¢] button.
Tuner Operation Theft Deterrent Faceplate Frequency Step Setting The faceplate of the unit can be detached and taken with you, helping to deter theft. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. Removing the Faceplate Press the Release button. The faceplate unlocks, allowing you to detach it. ¤ 1 Turn the power OFF Press the [SRC] button for at least 1 second.
Disc/ USB Operations of Remote Control Before Use • Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. • Set the remote controller mode switch to “DVD” mode before starting operation, refer to (page 30). Playing a Disc Inserting a disc in the unit “READING” appears on the display, and playback starts automatically. ✍ If playback does not start, press [38].
Displaying Status and Control on-screen DVD-VIDEO DVD-VR Video CD MPEG/DivX® JPEG You can display various information about the disc loaded on-screen. Video CD Example: DVD-VIDEO Status bar Control bar Status bar 1 Disc type 2 DVD: Audio signal format type and channel Video CD: PBC 3 Playback mode “T.RPT” (Title/ Track repeat), “C.RPT” (Chapter repeat), “PG.RPT” (Program repeat), “F.RPT” (Folder repeat) “F.RND” (Folder random), “A.
Disc/ USB Operations of Remote Control DVD-VIDEO Disc Menu Zoom DVDs may offer menus that allow you to access special features. The zoom function allows you to enlarge the video image. 1 Press the [MENU] button DVD-VIDEO DVD-VR The disc menu is displayed. 2 Use the [5]/[∞]/[2]/[3] button to highlight your selection, then press the [ENTER] button. 3 To return to the first menu feature, press the [TOP MENU] button again. 4 To remove the disc menu, press the [MENU] button again.
DVD-VIDEO Chapter search (“CHAP”), Title search (“TITL”), and Search mode off. DVD-VR Chapter search (“CHAP”), Program/Play list search (“PRGM”/ ”PLST”), and Search mode off. Video CD Track search (“TRAC”/“NMBR”*) and Search mode off. *PBC ON only for VCD CD MPEG/DivX® Track search (“TRAC” or “Track Search”), Audio File Folder search (“FOLD” or “Folder Search”), JPEG and Search mode off.
iPod Operations of Remote Control Before Use • Video output setting of iPod needs to be set on your iPod. • Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. • Set the remote controller mode switch to “DVD” mode before starting operation, refer to (page 30). Playing the iPod Connecting the iPod “READING” appears in the display, and playback starts automatically.
Music disc/Audio file/iPod Operation of Control Panel Music/Video Search Audio File CD MPEG/DivX® Music Search for iPod Search for the song (in iPod) you want to play. JPEG Selecting the track/ file you want to listen to from the device or media being played now. 1 Enter Music/Video Search mode Press the [ ] button. “SEARCH” is displayed. Displays the current Audio file name.
Music disc/Audio file/iPod Operation of Control Panel ⁄ iPod Control by Hand Mode • *1 Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected now. Set the ratio with “SKIP” in (page 11). Keep pressing this button for 3 seconds or longer skips songs at 10% irrespective of the setting. • The time of search by alphabet may become long depending on the number of songs in iPod or the folder structure.
Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD CH” display. Playing or pausing Press the [6] button. Music search Press the [4] or [¢] button. Changes the music when this button is pressed. Fast reverses or forwards the music while pressing. Disc Search Press the [FM+] or [AM–] button. Playing the Current Song or Disc Repeatedly (Repeat play) Press the [4] button.
Other Functions Activating Security Code When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off. ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
Audio Adjustments Audio Control You can adjust following Audio Control items ; Adjustment Item Display Range Rear volume “R-VOL” 0 — 35 AV output volume “AVVOL” 0 — 35 Subwoofer level “SW L” –15 — +15 Balance “BAL” Left 15 — Right 15 Fader “FAD” Rear 15 — Front 15 Exit Audio Control mode (Volume control mode) 1 Select the source to adjust • AV output source The sub source (DVD, USB) can be output to the AV output separately from the main source.
Audio Adjustments Select the iPod Equalizer curve 1. Enter iPod Equalizer mode Press the [AUD] knob. 2. Select the iPod Equalizer curve Turn the [AUD] knob and push the center when the desired item is displayed. 3 Exit Preset Equalizer mode. Press the [ ] button. ⁄ • You can select for each source.
Cabin Selection Speaker Setting You can compensate the delay of the sound arrival time by selecting your environment from the following car types; Setting the speaker to be connected, speaker size, and installation position; Car type Not compensating. Compact car Full size car Station wagon Display “OFF” “COMPACT” “FULLSIZE” “WAGON” Car type Minivan Sport-utility vehicle Minivan long Display “MINIVAN” “SUV” “MV LONG” 1 Enter Cabin select mode Press [ ] 1 sec., and select “DSP” > “SETUP” > “CABIN”.
Audio Adjustments X’Over Setting DTA (Digital Time Alignment) Setting You can set a X’Over value for the speakers; Adjusting fine tuning of the speaker position compensation value specified at (page 27).
Audio Preset Memory Audio Preset Recall Registering the value setup by Sound Control. Recalling the sound setup registered by
Basic Operations of Remote Control SRC AUDIO Dual Zone Control SRC OSD TOP MENU MENU SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM Select sub source of Dual zone system: [2 ZONE] Rear channel volume control: [R.VOL] AUDU O O O AUDU ENTER DVDU O /D FM+/AM– 0—9 Band select: [FM+]/[AM–] VOL O 1 2ABC 3 DEF 4GHI 5JKL 6MNO 2 ZONE VOL 2 ZONE Station select: [4]/[¢] R.VOL ATT In DVD/USB/iPod Source (DVD mode) Recall preset stations: [1] — [6] R.
Appendix For operating KCA-BT300 (Optional) Function Glossary For operation refer to Model-A in the Instruction Manual of KCA-BT300, and the table below. The [AUTO]/[TI] button should be replaced with [SRC] button for . Set the Type Swith on KCA-BT300 as folllows. 1: OFF, 2: OFF, 3: OFF Set the remote controller mode switch to “AUD” mode before starting operation. • “AUTO1”, “AUTO2”, “MANUAL” (Tuning mode select) Select a tuning mode of the radio.
Appendix +100cm 50cm 80cm 150cm +70cm +0cm • “HIGHWAY” (Highway sound) Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additionally, it accentuates bass sound being lost by road noises to make the bass sound more dynamic. • “ICON” Sets the Graphics mode of the display during normal playback condition. ON1: Turns on. ON2: Displays an animation. OFF: Turns off.
Language code list Code ENGLISH SPANISH FRENCH GERMAN ITALIAN DUTCH SWEDISH DANISH RUSSIAN CHINESE PORTUGUESE JAPANESE AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA Language English Spanish French German Italian Dutch Swedish Danish Russian Chinese Portuguese Japanese Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Bhutan
Accessories/ Installation Procedure Accessories 1 4 ..........1 2 ..........4 5 ..........2 ..........4 3 ..........1 (2m) Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6.
Connecting Wires to Terminals AUX input (Stereo) Use the mini-plug cable which is stereo type and does not have any resistance. Light Green (Parking sensor wire) ⁄ PRK SW Light Green (Extension cable: Accessory3) Yellow (Visual output) VIDEO OUT USB connector For the sake of safety, be sure to connect the parking sensor. Connect to the vehicle’s parking brake detection switch harness.
Installation/Removing the Unit Non-Japanese cars Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ Catch Accessory2 Removal tool • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • Cannot set up subwoofer phase. • No output from the subwoofer. ▲ • of (page 8) is not set to On. • Preout is not set to subwoofer. ☞ “MENU” > “SWPRE” of (page 10) • The Dual zone function is enabled. ☞
Troubleshooting Guide The messages shown below display your systems condition. NA DVICE: • An unsupported USB device is connected. • Connection to the iPod has failed. ➪ Check that the connected iPod is an iPod that is supported. See (page 4) for information on supported iPods. TOC ERR: • The disc is quite dirty. The disc is upsidedown. The disc is scratched a lot. • No disc has been loaded in the disc magazine. E-05: The disc is unreadable.
Specifications FM tuner section Frequency Range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable Sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.
For Turkey Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir. This product complies with Directive, Number 26891 regarding “REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT”.
