Operation Manual

16
7 - ELECTRONIC PROGRAMMER (BOTTOM MAIN OVEN ONLY)
The electronic programmer is a device which groups together the following functions:
• 24 hours clock with illuminated display
• Timer (up to 23 hours and 59 minutes)
• Program for automatic oven cooking
• Program for semi-automatic oven cooking
Description of the buttons:
Timer
Cooking time
End of cooking time
Simultaneously: Switching to
manual and program reset.
To increase the numbers on
the digital display
To decrease the numbers on
the digital display.
Description of the illuminated
symbols:
A
ashing-Programmerinautoma-
tic position but not programmed
A
illuminated - Programmer in au-
tomatic position with program in-
serted.
Automatic cooking taking place
Timer in operation
and A-ashing-Programerror.
(The time of day lies between the
calculated cooking start and end
time).
Note:
Select a function by the respective but-
ton and, in 5 seconds, set the required
time with the
/ buttons (“one-hand”
operation).
After a power cut the display resets to
zero and cancels the set programs.
Caution: If the electricity supply is cut
off (the display numbers will ash), the
clock will reset and all the programs en-
tered will be cancelled.
A
Fig. 7.1