Operation Manual

Left gas

inlet pipe

Right gas

inlet pipe

Plug

Fig. 10.2

Gasket

Fitting the 1/2” BSP

(male) connector

The male

connector is

already

fitted on the left

or right inlet pipe

1/2” BSP (male)

Fitting the plug on the

inlet pipe terminal not used

Cooker manifold

(Right or left

inlet pipe)

Manifold

male pipe fitting

Gasket (#)

Plug (#)

(#) Already fitted on the

right or left inlet pipe

1/2” G cylindrical

(ISO 228-1) male

1/2” G cylindrical

(ISO 228-1) female

Gas connection (gs. 10.2, 10.3, 10.4)

• The gas supply must use the nearest gas inlet pipe which is located at the left or the

right hand side at the rear of the appliance.

• IMPORTANT: Check the correct positioning of the male connector as per

pictures and always operate using two suitable spanners.

• Theunusedendinletpipemustbeclosedwiththeplugandthebrewasher.

• The hose should not be crushed or trapped or be in contact with sharp or abrasive

edges. It should also not be subjected to corrosion by acidic cleansing agents.

 Thehoseshouldalsobeconnectedinsuchawaythatitdoesnottouchtheoorand

musthanginanaturalloopbetweentheapplianceandthebayonettting.

• Toavoiddamagetotheappliancegasrailinletpipethettingsshouldbetightened

using two suitable spanners.

Fig. 10.3