Operation Manual

41
Left gas inlet pipe
Right gas inlet pipe
Plug
Fig. 9.1
Gas Connection
GB
Cat: II 2H3+
The gas supply must use the nearest gas inlet pipe which is located at the left or the right
handsideattherearoftheappliance(g.9.1).
Thehoseshouldalsobeconnectedinsuchawaythatitdoesnottouchtheoor.
Toscrewtheconnectingtubeoperatewithtwospanners(g.9.2).
The unused end inlet pipe must be closed with the plug interposing the gasket.
After connecting to the mains, check that the coupling are correctly sealed, using
soapysolution,butneveraame.
Gasket
Fitting the 1/2” BSP
(male) connector
The male
connector is
already
fitted on the left
or right inlet pipe
1/2” BSP (male)
Fitting the plug on the
inlet pipe terminal not used
Cooker manifold
(Right or left
inlet pipe)
Manifold
male pipe fitting
Gasket (#)
Plug (#)
(#) Already fitted on the
right or left inlet pipe
1/2” G cylindrical
(ISO 228-1) male
1/2” G cylindrical
(ISO 228-1) female
Fig. 9.2