DDX6015BTR DDX4015DAB DDX4015BT DDX4015BTR DDX3015 DDX3015R MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL © 2014 JVC KENWOOD Corporation DDX_Entry_E.
CONTENTS BEFORE USE BEFORE USE............................................................ 2 How to reset your unit.................................................... 3 BLUETOOTH (Only for DDX6015BTR/ DDX4015DAB/DDX4015BT/DDX4015BTR) ....... 30 INITIAL SETTINGS .................................................. 4 SETTINGS .............................................................. 38 Sound adjustment .........................................................38 Adjustment for video playback..........
BEFORE USE For DDX3015/DDX3015R Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossedout wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.
INITIAL SETTINGS Initial setup When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also change the settings on the screen. (Page 44) 1 (Page 45) (Page 45) DDX6015BTR * (Page 8) (Page 45) DDX4015DAB/DDX4015BT/DDX4015BTR/ DDX3015/DDX3015R (Page 28) (Page 41) Activate or deactivate the display demonstration.
INITIAL SETTINGS 4 Enter a four-digit number (1), then confirm the entry (2). 2 4 Set the clock time. The security indicator on the monitor panel flashes when the vehicle ignition is off. To deactivate the security function: Select [OFF] for . • Press [Clear] to delete the last entry. • Press [Cancel] to cancel the setting. 5 Repeat step 4 to confirm your security code. • When the unit is being reset or disconnected from the battery, you are required to enter the security code.
BASICS Component names and functions V Caution on the volume setting: Digital devices produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level. DDX6015BTR 1 Monitor panel* 2 Screen (touch panel) 3 Reset button/Power indicator/Security indicator • Resets the unit. (Page 3) • Lights up while the unit is turned on. • Flashes when the security function is activated.
BASICS 6 For DDX4015DAB/DDX4015BT/DDX4015BTR: TEL/VOICE button • Displays the screen. (Press) (Page 33) • Activates voice dialing. (Hold) (Page 35) For DDX3015/DDX3015R: AUD button Displays the screen. (Press) (Page 38) 7 For DDX4015DAB/DDX4015BT/DDX4015BTR: Volume/ATT/AUDIO knob • Attenuates the sound. (Press) (See the far right column.) • Adjusts the audio volume. (Turn) (See the far right column.) • Displays the screen.
BASICS R Adjusting the panel angle (only for DDX6015BTR) 1 Display the screen. R Putting the unit in standby R Turning off the screen 1 Display all the items. • This operation works only when is set to [V-OFF]. (Page 46) DDX6015BTR On the screen: On the screen: • Press [ ] repeatedly to change the page on the menu screen.
BASICS Common screen operations R Common screen descriptions You can display other screens any time to change the source, show the information, or change the settings, etc. Source control screen Performs source playback operations. • The operation buttons vary depending on the selected source. screen Displays the source control screen and settings screen.
BASICS Selecting the playback source On the screen: [NAV]*1 [DISC] [TUNER] [DAB]*2 [iPod] [USB] [Bluetooth]*3 [APPs]*4 Displays the navigation screen when a navigation unit is connected. (Page 29) Plays a disc. (Page 11) Switches to the conventional radio broadcast. (Page 20) Switches to the digital audio broadcast (DAB). (Page 23) Plays an iPod/iPhone. (Page 16) Plays files on a USB device. (Page 15) Plays a Bluetooth audio player.
DISCS Playing a disc • If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. • For playable disc types/file types, see page 55. R Inserting a disc Insert a disc with the label side facing up. DDX6015BTR DDX4015DAB/ DDX4015BT/ DDX4015BTR/ DDX3015/ DDX3015R The source changes to “DISC” and playback starts. • The IN indicator lights up while a disc is inserted.
DISCS Operation buttons • Available buttons on the screen and operations differ depending on the type of disc/file being played back. Playback information • The information displayed on the screen differs depending on the type of disc/file being played back. [MODE] 1 Media type 2 Track/file information • Pressing [<] scrolls the text if not all of the text is shown. 3 Current playback item information (folder no./file no./track no.
DISCS R Video menu operations You can display the video menu screen during video playback. • The operation buttons disappear when the screen is touched or when no operation is done for about 5 seconds. For video playback except VCD [ZOOM] [Aspect] [Picture Adjust] [Audio] [Subtitle] [Angle] [ MENU] [T MENU] [Highlight] [CUR] Displays the picture size selecting screen. (Page 40) Selects the aspect ratio. (Page 40) Displays the picture adjustment screen. (Page 39) Selects the audio type.
DISCS R Selecting playback mode [ [ ] Selects Random playback mode. ] Selects Repeat playback mode. • Available playback modes differ depending on the type of disc/file being played back. • You cannot activate the repeat mode and the random mode at the same time. • Each time you press the button, the playback mode changes. (The corresponding indicator lights up.) – Available items differ depending on the type of disc/file being played back. C-REP T-REP REP FO-REP FO-RDM RDM Repeats current chapter.
USB Connecting a USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit. • For details about connecting USB devices, see page 52. • You cannot connect a computer or portable HDD to the USB input terminal. • For playable file types and notes on using USB devices, see page 56. When a USB device is connected... The source changes to “USB” and playback starts. • All tracks in the USB device will be played repeatedly until you change the source.
iPod/iPhone USB R settings R Selecting a folder/track on the list Setting [Audio] Plays back audio files. [Still Image] Plays back picture files. [Video] Plays back video files. [Audio&Video] Plays back audio files and video (Initial) files. 1 • For playable files, see page 56. If the USB device contains no files of the selected type, the existing files are played in the following priority: audio, video, then still picture.
iPod/iPhone R Selecting preference settings for iPod/ iPhone playback 2 Playback operations When the source is “iPod”... 1 [AV-IN]*1 / Select this when the iPod/iPhone [AV-IN2]*2 is connected using KCA-iP102 or KCA-iP103 (optional accessory). [iPod] Select this when the iPod/iPhone is connected using KCA-iP202 (optional accessory). 2 Select the speed of audio books. Shows/hides artwork of iPod.
iPod/iPhone Operation buttons [MODE] [ ] [ ] [ ] [IW] [S] [T] [O] [N] [MENU] Changes the settings for iPod/iPhone playback on the screen. (Page 17) Selects random playback mode.*1 • RDM: Functions the same as Shuffle Songs. • A-RDM: Functions the same as Shuffle Albums. Selects repeat playback mode. • REP: Functions the same as Repeat One. • ALL REP: Functions the same as Repeat All. Displays the audio/video file list. (See the right column.) Starts/pauses playback.
APPs You can use Apps of the connected iPod touch/ iPhone on this unit. • You cannot use Apps with iPod touch (5th Generation)/iPhone 5S/iPhone 5C/iPhone 5. R Operation buttons on the source control screen R Switching to the App screen while listening to another source • This operation works only when is set to [APPs]. (Page 46) DDX6015BTR Preparation 1 Connect iPod touch/iPhone using KCA- (Hold) iP202. (Page 52) 2 Select [iPod] for .
TUNER Listening to the radio R Indications and buttons on the source control screen 1 2 3 p q 4 56 7 8 9 Tuner reception information 1 Band 2 Preset no. 3 The station frequency currently tuned in 4 ST/MONO indicator • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. 5 AF indicator 6 Seek mode 7 LO.S indicator (See the far right column.) 8 RDS indicator: Lights up when receiving a Radio Data System station.
TUNER Presetting stations R Selecting a preset station R Storing stations in the memory You can preset 6 stations for each band. Automatic presetting—AME (Auto Memory) (Hold) FM Radio Data System features Local stations with the strongest signals are found and stored automatically. R Searching for FM Radio Data System programs—PTY Search Manual presetting You can search for your favorite programs being broadcast by selecting the PTY code. 1 Tune in to a station you want to preset.
TUNER News Standby Reception 1 R Tracing the same program—NetworkTracking Reception R Automatic TI station seek—Auto TP Seek When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same program with stronger signals. • When shipped from the factory, Network-Tracking Reception is activated.
DIGITAL RADIO (DAB) (Only for DDX4015DAB) About DAB (Digital Audio Broadcasting) What is DAB system? DAB (Digital Audio Broadcasting) is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble.
DIGITAL RADIO (DAB) R Changing the display information R Selecting a service from the list 1 Display the screen. 3 Select a service from the list. On the 2 Select the list type. • You can change the page to display more items by pressing [ ]/[ ]. The preset list of service labels is displayed. • Press [TEXT] again to display the text information for the service or component currently being received. On the Selects from the preset list.
DIGITAL RADIO (DAB) Presetting services R Storing services in the memory Radio Data System features You can preset 15 services. R Searching for Radio Data System programs—PTY Search 1 Select a service you want to preset. You can search for your favorite programs being broadcast by selecting the PTY code. (Page 23) 2 Select a preset number. • If you want to select a preset number between P6 – P15, press [P>] to display those numbers.
DIGITAL RADIO (DAB) Settings for Digital Audio Radio You can set the Digital Radio related items. R Setting items • ON (initial): If the same service is provided by Digital Radio during Radio Data System reception, the unit automatically switches to Digital Radio. If the same service is provided by Radio Data System when reception of the service being provided by Digital Radio becomes poor, the unit automatically switches to Radio Data System. • OFF: Deactivates.
OTHER EXTERNAL COMPONENTS Using external audio/video players—AV-IN When the operation buttons are not displayed on the screen, touch the area shown on the illustration. • To change settings for video playback, see page 39. You can connect an external component to the Audio Video input terminal* and iPod/Audio Video input terminal. (Page 52) * Only for DDX4015DAB/DDX4015BT/DDX3015. R Preparation 2 R Starting playback 1 Connect an external component.
OTHER EXTERNAL COMPONENTS Using a rear view camera • To connect a rear view camera, see page 52. • To use a rear view camera, a REVERSE lead connection is required. (Page 51) R Displaying the picture from the rear view camera The rear view screen is displayed when you shift the gear to the reverse (R) position. To display the picture from the rear view camera manually • This operation works only when is set to [R-CAM].
OTHER EXTERNAL COMPONENTS Using the external navigation unit (Only for DDX4015DAB/ DDX4015BT/DDX3015) You can connect a navigation unit (KNA-G620T: optional accessory) to the NAV input terminal so that you can view the navigation screen. (Page 52) • The navigation guidance comes out of the front speakers even when you listen to an audio source. To exit the navigation screen 3 R Settings for the navigation unit 1 Display the setting screen.
BLUETOOTH (Only for DDX6015BTR/DDX4015DAB/DDX4015BT/DDX4015BTR) Information for using Bluetooth® devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as mobile phones, portable PCs, and other devices. Bluetooth devices can be connected without cables and communicate with each other. Notes • While driving, do not perform complicated operations such as dialing numbers, using the phonebook, etc. When you perform these operations, stop your car in a safe place.
BLUETOOTH Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0) 1 Display the screen. On the screen: • Press [ ] repeatedly to change the page on the menu screen. 2 Change the PIN code. • If you skip changing the PIN code, go to step 3. • The PIN code is initially set to “0000”. • The maximum number of digits in the PIN code is 16. 4 Select the unit (“DDX ****”) for your Bluetooth device. DDX**** • If the PIN code is required, enter “0000” (initial).
BLUETOOTH R Connecting a registered Bluetooth device • When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed when the information is acquired from the device. 1 Display the screen. (Page 31) 2 1 Display the screen. (1), then select what you want to use the device for (2). R Receiving a call When a call comes in...
BLUETOOTH R Adjusting the volume of calls/earpiece/ microphone While talking... • You can adjust the volume level between –20 to +8 (initial: 0). • Use the monitor panel to adjust the call/earpiece volume. (Page 7) R Notification when SMS is received R Making a call If the mobile phone is compatible with SMS (Short Message Service), the unit tells you a message has been received when is set to [ON].
BLUETOOTH From the phone book/call lists 1 • To use the A to Z search in the phone book: When the screen is displayed, you can search by initial. 1 [Outgoing] [Incoming] [Missed] [Phonebook] From the dialed call list From the received call list From the missed call list From the phone book • To copy the phone book, see page 35.
BLUETOOTH Voice dialing • Available only when the connected mobile phone has a voice recognition system. 1 Activate voice dialing. R Presetting phone numbers 3 You can preset up to 6 phone numbers. 1 Display the screen. (Page 33) On the screen: 2 Select an item from the phone book/call lists. (Page 34) 3 Select a phone number. On the monitor panel: DDX6015BTR DDX4015DAB/DDX4015BT/ DDX4015BTR (Hold) (Hold) 4 Select a preset number to store into.
BLUETOOTH About mobile phones compatible with Phone Book Access Profile (PBAP) If your mobile phone supports PBAP, you can display the phone book and call lists on the touch panel screen when the mobile phone is connected. • Phone book: up to 5 000 entries • Dialed calls, received calls, and missed calls: up to 50 entries each R Deleting the phone number entries in the unit 1 Display the phone book/call list you want to delete.
BLUETOOTH R Setting items Shows the connected phone device name. • ON: The unit answers the incoming calls automatically in 5 seconds. • OFF (Initial): The unit does not answer the calls automatically. Answer the calls manually. arrival of a message by ringing and displaying “Receiving Message”. • OFF (Initial): The unit does not inform you of the arrival of a message.
SETTINGS Sound adjustment 2 Select a sound mode. R Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC • You cannot adjust the sound when the unit is in standby. Selecting a preset sound mode 1 Display the screen.
SETTINGS R Adjusting the crossover frequency 1 Display the screen. On the screen: Adjusts the crossover for the front/rear speakers (high pass filter). Adjusts the crossover for the subwoofer (low pass filter).*1 Adjusts the subwoofer level.*1 Selects the phase for the subwoofer.*2 Adjusts the crossover frequency. * Adjustable only when the subwoofer is activated. (Page 44) *2 Not selectable when is set to .
SETTINGS R Changing the aspect ratio * You can change the aspect ratio for video playback. For 16:9 original pictures 4:3 signal 16:9 signal 1 Display the adjustment menu. 2 Select the aspect ratio. For viewing 4:3 pictures naturally on the wide screen 4:3 signal 16:9 signal * For 4:3 original pictures 4:3 signal 16:9 signal For “DISC”/“USB” only: The aspect ratio is automatically selected to match the incoming signals.
SETTINGS To select a panel color Changing display design R Storing your own scene for the background image You can change the background and panel color. 1 Display the screen. On the screen: *2 • Selecting [Scan] changes the illumination color gradually. *1 Store your own scene beforehand. (See the right column.) *2 Store your own color adjustment beforehand. (See below.) R Making your own color adjustment 1 Select [Panel Color] on the screen.
SETTINGS 5 Capture the image displayed on the screen. 2 Select where to place the icon (1), then select the item you want to display in the selected position (2). A confirmation message appears. Press [Yes] to store the newly captured image. (The existing image is replaced with the new one.) • Press [No] to return to the previous screen. * Not displayed when playing an external component connected to the Audio Video input or iPod/Audio Video input terminal.
SETTINGS R Locking the settings R Adjusting the touch position You can lock the settings to prevent them from being changed. • A icon is shown beside the settings that can be locked. You can adjust the touch position on the touch panel if the position touched and the operation performed do not match. 1 Display the screen. 1 Display the screen. 3 On the screen: • Press [ ] repeatedly to change the page on the menu screen.
SETTINGS Setting menu items R Displaying the menu screen R
SETTINGS Change the display design (background and panel color). (Page 41) • ON: Displays the clock while a video source is played back. • OFF (Initial): Cancels. • ON (Initial): Activates the demonstration on the screen. • OFF: Cancels. • ON (Initial): Repeats scrolling. • Once: Scrolls the displayed information once. • OFF: Cancels. Pressing [<] scrolls the text regardless of this setting.
SETTINGS Adjust the clock time. (Page 5) • ON (Initial): Activates the key-touch tone. • OFF: Cancels. • ON (Initial): Activates the remote sensor. • OFF: Cancels. You can memorize, recall, or clear the settings you have made. (Page 42) *1 Configure settings for using a Bluetooth device, such as connection and other general operations. • Paired Device List: Press [Enter] to show the list of registered devices.
REMOTE CONTROLLER Overview Optional Remote Controller KNA-RCDV331 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller. V Caution: • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight.
REMOTE CONTROLLER R DVD/VCD (DVD mode) J/K/H/I S/T I/W o 0–9 Moves the cursor when displaying a menu. Selects a track. Starts/pauses playback. Stops and memorizes the point where the disc stops. • Specifies the number to search for in direct search. : Fast forwards/ • backwards. – Fast forward/backward speed changes each time you press this key. • : Slow forwards/ backwards during pause. MODE/ Shows the disc top menu. TOP MENU FNC/PBC/ Shows the disc menu. MENU SUBTITLE Changes the subtitle language.
CONNECTION/INSTALLATION Before installing the unit V WARNING • If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. • Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.
CONNECTION/INSTALLATION R Installation procedure 1 To prevent a short circuit, remove the key 2 3 4 5 6 7 from the ignition and disconnect the · battery. Make the proper input and output wire connections for each unit. Connect the speaker wires of the wiring harness. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. Take Connector A on the wiring harness and connect it to the external power connector in your vehicle.
CONNECTION/INSTALLATION Connection *1 *2 *3 *4 R Connecting wires to terminals Only for DDX6015BTR/DDX4015DAB/DDX4015BT/DDX4015BTR. Only for DDX4015DAB/DDX4015BT/DDX3015. Only for DDX4015DAB. For DDX6015BTR/DDX4015BT/DDX4015BTR/DDX3015/DDX3015R: The appearance of the aerial terminal is different from the illustration. *5 If no connections are made, do not let the cable come out from the tab. USB terminal (0.8 m): See page 52. See page 53.*1 See page 52.
CONNECTION/INSTALLATION R Connecting a USB device/iPod/iPhone iPod nano (7th iPod/iPhone except Generation)/ for iPod nano (7th iPod touch (5th Generation)/iPod touch Generation)/iPhone (5th Generation)/iPhone 5S/iPhone 5C/iPhone 5 5S/iPhone 5C/iPhone 5 (commercially available) (commercially available) R Connecting external components DDX6015BTR/DDX4015BTR/ DDX3015R DDX4015DAB/DDX4015BT/ DDX3015 KCA-iP103 (optional accessory) USB device* (commercially available) 0.8 m KCA-iP102 (optional accessory) 0.
CONNECTION/INSTALLATION R Connecting microphone for Bluetooth (only for DDX6015BTR/DDX4015DAB/ DDX4015BT/DDX4015BTR) Connect the microphone (5) to MIC terminal. • To install the microphone, peel off the adhesive tape, fix on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available).
REFERENCES Maintenance R Caution on cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. R Moisture condensation Moisture may condense on the lens inside the unit in the following cases: • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the unit may malfunction.
REFERENCES Playing MP3/WMA/WAV/AAC-LC files • This unit can play back files with the extension code <.mp3>, <.wma>, <.wav> or <.m4a> (regardless of the letter case—upper/lower). • This unit can play back files that meet the conditions below: – Bit rate: MP3: 8 kbps – 320 kbps WMA: 5 kbps – 320 kbps AAC: 16 kbps – 320 kbps – Sampling frequency: 8 kHz – 48 kHz (for MP3/WMA) 44.1 kHz (for WAV) 32 kHz – 48 kHz (for AAC) • This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3).
REFERENCES Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Use only “finalized” discs. • This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. • Some discs or files may not be played back due to their characteristics or recording conditions.
REFERENCES R Language codes (for DVD language selection) AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic GL GN GU HA HI HR HU HY IA IE IK IN IS IW JA JI JW KA KK KL KM KN KO KS KU KY LA LN LO
REFERENCES Error message list If an error occurs while using the unit, a message appears. Take appropriate action according to the following message/remedy/cause list. “No Signal”: • Start the playback on the external component connected to the Audio Video or iPod/Audio Video input terminal. • Check the cords and connections. • Signal input is too weak. “Miswiring DC Offset Error”/“Warning DC Offset Error”: • A speaker cord has shorted or it has come into contact with the car chassis.
REFERENCES R Discs in general Recordable/Rewritable discs cannot be played back. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. Tracks on the Recordable/Rewritable discs cannot be skipped. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. Playback does not start. • The file format is not supported by the unit. No picture appears on the external monitor. • Connect the video cord correctly.
REFERENCES R Tuner AME automatic presetting does not work. • Store stations manually. (Page 21) Static noise while listening to the radio. • Connect the aerial firmly. R Digital Radio (DAB) (only for DDX4015DAB) Cannot receive an ensemble. • Your area is not covered by the ensemble. The DAB aerial is not properly extended or positioned. • Adjust the aerial and try the ensemble scanning again. • Connect an active aerial (not supplied). R AV-IN*1/AV-IN1*2/AV-IN2*2 No picture appears on the screen.
REFERENCES Specifications R Monitor section Picture Size (W x H) DDX6015BTR: 6.95 inches (diagonal) wide 156.6 mm × 81.6 mm DDX4015DAB/DDX4015BT/DDX4015BTR/ DDX3015/DDX3015R: 6.2 inches (diagonal) wide 137.5 mm × 77.2 mm Display System Transparent TN LCD panel Drive System TFT active matrix system Number of Pixels 1 152 000 (800H × 480V × RGB) Effective Pixels 99.
REFERENCES R Digital tuner (DAB) section (only for DDX4015DAB) Frequency Range L-BAND: 1 452.960 MHz − 1 490.624 MHz BAND III: 174.928 MHz − 239.200 MHz Sensitivity −100 dBm Signal to Noise Ratio 90 dB DAB Aerial Connector Connector type: SMB Output Voltage: 14.4 V (11 V – 16 V allowable) Maximum Current: <100 mA R MW tuner section Frequency Range (9 kHz) 531 kHz – 1 611 kHz Usable Sensitivity 28.
REFERENCES R Trademarks and licenses • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • The “AAC” logo is a trademark of Dolby Laboratories. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
For DDX6015BTR/DDX4015DAB/DDX4015BT/DDX4015BTR Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan EU Representative: JVCKENWOOD NEDERLAND B.V.
