Instruction Manual

56 DNX5260BT/DDX5026/DDX5056
Equalizer Control
You can set up the equalizer.
Display the Equalizer screen1
Touch [
]
>
[ ]
>
[Equalizer]. (page 55)
Set each item2
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pop"/ "Easy"/ "Top40"/
"Jazz"/ "User"
⁄
"User":•
Your own tone curve can be created. See <Tone
Setup> (page 56).
[SystemQ-EX] Selects items to be adjusted for
tone curve setup.
If selected "OFF", only Level can be set up for
tone curves.
[Tone] Displays the Tone curve setup screen.
(page 56)
Tone Setup
You can set a Tone curve.
Display the Equalizer screen1
Touch [
]
>
[ ]
>
[Equalizer]. (page 55)
Display the Tone Control screen2
Set the Tone3
[Bass] Bass adjustment items are displayed.
[Middle] Middle adjustment items are
displayed.
[Treble] Treble adjustment items are displayed.
[Flat] Tone level becomes 0 (flat).
[FREQ] Sets the Center frequency.
[Level] Sets the level.
[Q Factor] Sets the Q factor. (Only [Bass] and
[Middle] can be set)
[Bass DC EXT] Bass DC Extend settings. (Only
[Bass] can be set)
If turned "ON", it extends the bass center
frequency to the low register by approximately
20%.
[SW Level] Adjusts the subwoofer volume.
The setting is available when subwoofer is set
to "ON". See <Speaker Setup> (page 72).
Audio Control
B64-4606-00_02_E_En.indd 56B64-4606-00_02_E_En.indd 56 10.2.18 3:31:25 PM10.2.18 3:31:25 PM