Operation Manual
44
SETTINGSSETTINGS
Setting menu items
R Displaying the <Setup > menu screen
On the <TOP MENU> screen:
• You cannot change the <Audio> settings screen
when [STANDBY] is selected on the <TOP
MENU> screen. (Page8)
• Only for DDX4015DAB : You can change the <DAB
setup> in the <System> setting only when
[STANDBY] is selected on the <TOP MENU>
screen. (page8)
R <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page38)
• Drive EQ (Initial)/Natural/Rock/Pops/Easy/
Powerful/Top40/Jazz/User
<Loudness>
You can activate/deactivate loudness.
• ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level. The LOUD indicator lights up.
• OFF: Cancels.
<X’over>*
Adjust the crossover frequency. (Page39)
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The
volume level will automatically increase or decrease
when you change the source.
• –15 to +6 (Initial: 0)
< Subwoofer>*
• ON (Initial): Activates the subwoofer.
• OFF: Deactivates the subwoofer.
<Bass Boost>
Select your preferred bass boost level.
• OFF (Initial)/Level 1/Level 2/Level 3
<Speaker Select>*
Select the size of the connected speaker.
• Standard (Initial)/Narrow/Middle/Wide
* When an item is grayed out, you cannot change the setting. Select
[Unlock] on the <
SETUP Memory> screen to change the
setting. (Page43)
R < Display> setting screen
<Dimmer>
• Auto (Initial): Dims the screen and button
illumination when you turn on the headlights.
– The ILLUMI lead connection is required.
(Page 51 )
• ON: Activates dimmer.
• OFF: Cancels.
• NAV*: Activates or deactivates the dimmer
according to the day/night display setting of the
connected navigation unit.
* Only for DDX4015DAB/DDX4015BT/DDX3015.
DDX_Entry_E.indb 44DDX_Entry_E.indb 44 2014/09/11 11:142014/09/11 11:14