Operation Manual

52
CONNECTION/INSTALLATIONCONNECTION/INSTALLATION
R Connecting a USB device/iPod/iPhone
0.8 m
0.8 m
1.8 m
0.8 m
USB device*
(commercially
available)
KCA-iP202 (optional accessory)
KCA-iP102
(optional
accessory)
KCA-iP103
(optional accessory)
iPod nano (7th
Generation)/
iPod touch (5th
Generation)/iPhone
5S/iPhone 5C/iPhone 5
(commercially available)
iPod/iPhone except
for iPod nano (7th
Generation)/iPod touch
(5th Generation)/iPhone
5S/iPhone 5C/iPhone 5
(commercially available)
DDX4015DAB/DDX4015BT/
DDX3015
DDX6015BTR/DDX4015BTR/
DDX3015R
* Use CA-U1EX for extending the cable if necessary. (Max 500 mA, 5V)
R Connecting external components
DDX4015DAB/DDX4015BT/
DDX3015
DDX6015BTR/DDX4015BTR/
DDX3015R
1 iPod/Audio Video input*
1
• For DDX6015BTR/DDX4015BTR/DDX3015R:
iPod/AV-IN
• For DDX4015DAB/DDX4015BT/DDX3015: iPod/
AV-IN2
2 Video output (Yellow)
3 Rear preout*
2
• Audio left output (White)
• Audio right output (Red)
4 DAB aerial input*
3
5 Front preout*
2
• Audio left output (White)
• Audio right output (Red)
6 Subwoofer preout (monaural output)*
2
• Subwoofer left output (White)
• Subwoofer right output (Red)
7 NAVI I/F input*
4
8 Audio Video input (AV-IN1)*
1
*
4
9 Steering wheel remote controller input*
4
• Connect to the vehicle’s steering remote
harness. Contact your Kenwood dealer for
details.
p Rear view camera input (Yellow)
*
1
When connecting the component to play on “AV-IN” or
“AV-IN1”/“AV-IN2”, use the Audio and Video cable CA-C3AV
(optional accessory).
*
2
When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
*
3
Only for DDX4015DAB. To use the digital radio, connect CX-DAB1
(optional accessory).
*
4
Only for DDX4015DAB/DDX4015BT/DDX3015.
DDX_Entry_E.indb 52DDX_Entry_E.indb 52 2014/09/11 11:142014/09/11 11:14